Okidata Microline 520 Service Handbook
Download Service handbook of OKIDATA Microline 520 Printer for Free or View it Online on All-Guides.com.
Brand: OKIDATA
Category: Printer
Type: Service handbook
Model: OKIDATA Microline 520 , OKIDATA Microline 521
Pages: 321
3.2.25 Carriage Shaft
CAUTION
The space motor assembly, etc. may be left in place when removing the carriage shaft.
However, use extra care when doing so.
The carriage cable should be detached from the space motor before removing the
carriage shaft.
1. Perform these procedures: 3.2.01, 3.2.06, 3.2.07, and 3.2.16.
2. Push the end (A) of the carriage shaft (1) until it clears the base frame.
3. Pull the carriage shaft free of the base frame.
4. Remove the support protect reset spring (2).
5. Remove the support protector assembly (3).
6. Remove the frame set carriage (4).
NOTE:
Installation
After installing the carriage shaft, check the printhead gap adjustment. Refer to
Section 3.3 of this Service Handbook.
Cleaning
When cleaning, refer to Section 3.4 of this Service Handbook.
Lubrication
When lubricating, refer to Section 3.5 of this Service Handbook.
P/N 50098901 Carriage: Frame Set RSPL Both B.2.07
P/N 50923601 Spring: Support Protect Reset RSPL Both B.2.04
P/N 53067601 Protector: Support (Assembly) RSPL Both B.2.04
P/N 53563501 Shaft: Carriage (Narrow) RSPL 520 B.2.04
P/N 53563502 Shaft: Carriage (Wide) RSPL 521 B.2.04
Maintenance 3 - 52 Microline 520/521 Service Handbook
P/N 59257803