Amana AMH20 Service Manual

Download Service manual of Amana AMH20 Microwave Oven for Free or View it Online on All-Guides.com. This version of Amana AMH20 Manual compatible with such list of devices, as: AMH20A2, JBH202, P1331101M, P1331103M, P1332506M

Amana AMH20 Service manual - Page 1
1
Amana AMH20 Service manual - Page 2
2
Amana AMH20 Service manual - Page 3
3
Amana AMH20 Service manual - Page 4
4
Amana AMH20 Service manual - Page 5
5
Amana AMH20 Service manual - Page 6
6
Amana AMH20 Service manual - Page 7
7
Amana AMH20 Service manual - Page 8
8
Amana AMH20 Service manual - Page 9
9
Amana AMH20 Service manual - Page 10
10
Amana AMH20 Service manual - Page 11
11
Amana AMH20 Service manual - Page 12
12
Amana AMH20 Service manual - Page 13
13
Amana AMH20 Service manual - Page 14
14
Amana AMH20 Service manual - Page 15
15
Amana AMH20 Service manual - Page 16
16
Amana AMH20 Service manual - Page 17
17
Amana AMH20 Service manual - Page 18
18
Amana AMH20 Service manual - Page 19
19
Amana AMH20 Service manual - Page 20
20
Amana AMH20 Service manual - Page 21
21
Amana AMH20 Service manual - Page 22
22
Amana AMH20 Service manual - Page 23
23
Amana AMH20 Service manual - Page 24
24
Amana AMH20 Service manual - Page 25
25
Amana AMH20 Service manual - Page 26
26
Amana AMH20 Service manual - Page 27
27
Amana AMH20 Service manual - Page 28
28
Amana AMH20 Service manual - Page 29
29
Amana AMH20 Service manual - Page 30
30
Amana AMH20 Service manual - Page 31
31
Amana AMH20 Service manual - Page 32
32
Amana AMH20 Service manual - Page 33
33
Amana AMH20 Service manual - Page 34
34
Amana AMH20 Service manual - Page 35
35
Amana AMH20 Service manual - Page 36
36
Amana AMH20 Service manual - Page 37
37
Amana AMH20 Service manual - Page 38
38
Amana AMH20 Service manual - Page 39
39
Amana AMH20 Service manual - Page 40
40
Amana AMH20 Service manual - Page 41
41
Amana AMH20 Service manual - Page 42
42
Amana AMH20 Service manual - Page 43
43
Amana AMH20 Service manual - Page 44
44
Amana AMH20 Service manual - Page 45
45
Amana AMH20 Service manual - Page 46
46
Amana AMH20 Service manual - Page 47
47
Amana AMH20 Service manual - Page 48
48
Amana AMH20 Service manual - Page 49
49
Amana AMH20 Service manual - Page 50
50
Amana AMH20 Service manual - Page 51
51
Amana AMH20 Service manual - Page 52
52
Amana AMH20 Service manual - Page 53
53
Disassembly
To avoid the risk of electrical shock, personal injury, or death, disconnect power to oven and discharge capacitors
before following any disassembly procedure.
!
WARNING
©2006 Maytag Services 16023463 31
Capacitor / Diode
1. See figure 3, page 33 for location.
2. Remove outer case, see “Outer Case” procedure.
3. Discharge capacitor and remove wire terminals from
capacitor.
4. Remove screws securing capacitor mounting bracket
to oven chassis.
5. Loosen screws securing capacitor strap to capacitor.
6. Reverse procedure to reassemble.
Convection Box
1. See “Component Location” Figure 5, page 34.
2. Remove back panel, see “Back Panel” procedure.
3. Remove inlet duct assembly, See “Inlet Duct
Assembly” procedure.
4. Remove control board bracket assembly, see “Control
Board Bracket Assembly” procedure.
5. Disconnect and label wire terminals from Heating
Element, TCO, and Temperature Sensor.
6. Remove screws securing thermal limiter to convection
box.
7. Remove screws securing convection box to plenum
box.
8. Remove convection box from unit.
9. Remove bolt securing fan blade and pull fan blade off.
10.Remove screws securing convection motor to heater
box.
11. Reverse procedure to reassemble.
Convection Element
1. Remove convection box, see “Convection Box”
procedure (located above).
2. Remove screws securing convection element to
convection box.
3. Reverse procedure to reassemble.
NOTE: Center convection element around convection
fan blade and spin fan blade to ensure it does
not hit convection element.
Thermal Limiter
1. See figure 3, page 33 for location.
2. Remove outer case, see “Outer Case” procedure.
3. Disconnect and label wire terminals from limiter.
4. Remove screws securing thermal limiter to convection
box.
5. Loosen and remove RTV sealant securing limiter to
plenum box.
6. Reverse procedure to reassemble.
NOTE: When reinstalling and securing limiter tube into
plenum box. Lower limiter tube into the plenum
box until 1/4” of limiter tube is left outside the
plenum box and secure with RTV. Perform
operational check on unit to ensure there is no
air leakage around the limiter tube.
Fuse
1. See “Component Location” Figure 2, for location.
2. Remove outer case.
3. Replace fuse and reassemble in reverse order.
Power Cord
1. See “Component Location” Figure 3, for location.
2. Remove outer case and back panel.
3. Disconnect wiring.
4. Remove strain relief by compressing with pliers.
5. Remove power cord.
6. Reassemble power cord in reverse order.
Line Filter (50 Hz Models Only)
1. See “Component Location” Figure 3, for location.
2. Remove outer case and back panel.
3. Disconnect wiring.
4. Remove power cord strain relief by compressing with
pliers.
5. Remove power cord.
6. Remove screws securing line filter and remove.
7. Reassemble power cord in reverse order.