Sony NSR-500 Series Installation Manual
Download Installation manual of Sony NSR-500 Network Hardware, Security Camera for Free or View it Online on All-Guides.com.
Brand: Sony
Category: Network Hardware , Security Camera , Server
Type: Installation manual for Sony NSR-500
Pages: 248
32
Step 3: Settings
User
Enter the user name for connecting
to the device. It can be up to 32
characters and consist of
alphanumeric characters and some
symbols (periods (.), hyphens (-),
underscores (_)).
Password
Enter the password for connecting
to the device. It can be up to 32
characters and consist of
alphanumeric characters and some
symbols (periods (.), hyphens (-),
underscores (_)).
IP Address
Enter the IP address for the device.
When registering multiple devices
simultaneously, IP addresses are
configured sequentially, starting
with the entered address.
Port No.
Enter the port number on the device
side for when connecting with the
device.
The default setting is “80.”
The dialog box closes, and the
Multiple Camera Registration
dialog box reappears.
5 Select the check boxes of the devices
you want to register, and click the
[Register] button.
If you click the [Reload] button, the
automatic search is performed again.
Take care because apart from the user
name and password of the
administrator, all of the values you
entered up until now will be replaced
with the results obtained with the
automatic search.
When registration completes, the
following screen appears.
6 Click [Finish].
The devices are registered to NSR.
Proceed to “Configuring automatic record
settings” (page 34).
Caution