Sony NSR-500 Series Installation Manual
Download Installation manual of Sony NSR-500 Network Hardware, Security Camera for Free or View it Online on All-Guides.com.
Brand: Sony
Category: Network Hardware , Security Camera , Server
Type: Installation manual for Sony NSR-500
Pages: 248
17
Reference Data for Installation / Preparation Steps
Reference Data
for Installation
Storage Capacity for
Recorded Data
You can confirm the configurations and the
hard disk drive capacity of the NSR
1)
by
clicking [Information] in the Logon screen,
and viewing the Information screen that
appears. You can also confirm the actual
storage capacity
2)
to which data can be
recorded in the [Storage] tab of the Server
screen.
1) Capacities for hard disk drives are
approximations based on the following
equation for 1 GB: 1,000 × 1,000 × 1,000 =
1,000,000,000 bytes
2) Storage capacities are approximations based
on the following equation for 1 GB: 1,024 ×
1,024 × 1,024 = 1,073,740,000 bytes
Number of Cameras
At the time of purchase, the maximum
number of cameras that can be registered is
16.
For details on adding cameras, contact your
Sony dealer.
Preparation Steps
Step 3: Settings (page 21)
Note
Step 1: Installation (page 18)
Step 2: Connections (page 19)
Connect each device to the unit.
Turn on the unit.
Configure initial settings
with the Setup Wizard.
Log on.
Perform
registration
with Easy
Setup.
Select
automatically
detected
cameras and
register them
simultaneously.
Register
devices
manually.
Configure automatic record
settings.
Step 4: Verifying Operation
(page 36)
If advanced configuration is
necessary
Refer the User’s Guide (PDF).