Yeastar Technology MyPBX SOHO User Manual
Download Operation & user’s manual of Yeastar Technology MyPBX-SOHO Gateway, PBX for Free or View it Online on All-Guides.com.
Brand: Yeastar Technology
Category: Gateway , PBX , Server , Wireless Access Point
Type: Operation & user’s manual for Yeastar Technology MyPBX-SOHO
Pages: 76
Download Yeastar Technology MyPBX-SOHO Operation & user’s manual
MyPBX-SOHO User Manual
www.yeastar.com Page 36
Users can check their voice mail by dialing *2 on their phone (*2 is default
setting).
·Attended Transfer
Users may transfer an incoming call by dialing *3 on their phone (*3 is default
setting).
·Blind Transfer
Users may blind transfer an incoming call by dialing *03 on their phone (*03 is
default setting).
·Call Pickup
Users may pick up an incoming call by dialing *4 on their phone (*4 is default
setting)
·Pickup a specific extension
Users may pick up a specific extension’s incoming call by dialing *04+extension
number on their phone (*04 is default setting)
·Intercom
Define the feature code that is used to dial an extension in intercom mode. For
instance setting this value to *5 would allow you to initiate an intercom call with
extension 501 by dialing *5501.
2. Call Parking Preferences
·Call Parking
User may enable call parking by calling *6 on his phone (*6 is default setting)
·Call Parking in specify extension
User may enable the call parking in specify extension, then call the specify
extension in any phone to continue the calling.
·The waiting time for Call parking
The maximum time for the call parking, using “second” as unit.
3. Call Forward Preferences
·Reset to defaults
User may reset the call forward default value by calling *70 on his phone (*70
is default setting)
Note: When the Reset to defaults feature is used, the call forward default
values will be set as follows:
Always forward: Disabled
Busy forward to voice mail: Enabled
No answer forward to voice mail: Enabled
Do not disturb: Disabled
·Enable always forward
User may enable always forward by calling *71 on his phone (*71 is default
setting)
·Disable always forward