Sanav GC-101 User Manual
Download Operation & user’s manual of Sanav GC-101 GPS for Free or View it Online on All-Guides.com.
15
5.7 All Parameters Reset to Default
Use this SMS message to reset GC-101 to factory default. You can just send the SMS according to the example seen below.
It will overwrite all the current parameters to default.
Setup format:#「username」,「Password」,「Function Code」*
Example:#username,0000,9*
The table 5.7.1 describes the meaning of each segment in the message above.
Table 5.7.1
The table 5.7.2 shows each confirm message reply after setup.
Table 5.7.2
Text Keyed In SMS
Description
# Start sign.
username Default ID of GC-101.
If you have changed the Username, please use the updated one.
0000 Default password.
If you have changed the password, please use the updated one.
9 Mode 9 defines to change all the parameter to default value
* End sign.
Situation Message Reply
Setup Succeeds [username] + Setup OK. GC-101 resets to default
Setup Fail [username] + Reset Fail!
Incorrect password [username] + Password setup Fail!
Incorrect username or command format
[username] + command error
GC-101 is in Emergency Mode [username] + in emergency, reset to default is not allowed.