Logan F200-1 Instruction Manual
Download Instruction manual of Logan F200-1 Sander for Free or View it Online on All-Guides.com.
1
2
3
4
Description
The Model F200-1 Precision Sander has been designed to improve saw cut miters
to perfect 45˚ and other commonly used angles. After sanding the miters, the
result is a sharp seamless frame corner that is of professional quality. The Model
F200-1 Precision Sander is a precision tool and will give many years of service.
Producing professional quality picture frames is now easier than ever.
Instruction Manual
SANDER
Precision
PICTURE FRAMING
www.logangraphic.com
Model F200-1
Reference Part No. L689N
Rev. 12/08
Identification
Disk - 10 lb. wheel which rotates in either direction for sanding.
Handle - Handle to drive wheel.
Alignment Bar - Fence stop that the frame lines up against for sanding. Rotates to three settings.
Micro-stops - Alignment bar adjustments for perfect 45˚ angles.
Cleaning Bar - Used to loosen built-up saw dust on sanding disk.
45˚ Triangle - Used to fine tune micro-stops to 45˚.
Rabbet - Undercut section of frame where framing material stacks onto.
90˚ Setting - Hole for alignment bar to set at 90˚.
L
ogan Graphic Products Inc.
1100 Brown Street
Wauconda, IL 60084 USA
T
oll Free 1 800 331 6232
P
hone 1 847 526 5515
Toll Free Fax 1 800 331 6329
Fax 1 847 526 5155
w
ww.logangraphic.com