• Home
• Brands
• Vector Manuals
• Vector TCY-FT2-U
• Vector TCY-FT2-U-W01 Manual

Vector TCY-FT2-U-W01 Manual

Download Manual  of Vector TCY-FT2-U Controller, Temperature Controller for Free or View it Online on All-Guides.com. This version of Vector TCY-FT2-U Manual compatible with such list of devices, as: TCY-FT2-U, TCY-FT2-U-W01, TCY-FT2-U-W02, TCY-FT4-U

1

2

3

4

5

6

7

8

TCY-FT-U

Temperature PID controller

Doc: 70-00-0128B, V1.2, 20110621 © Vector Controls GmbH, Switzerland Page 1

Subject to alteration

TCY-FT-U Series Intelligent Temperature Controller

Features

• Temperature PID control for HVAC systems.

• Up to two 3-point outputs for 24VAC actuators.

• 1 internal temperature sensor and up to 2 external sensor inputs

• Multiple remote control functions on external input

• Password protected programmable user and control parameters

• Blue backlight

Applications

• Various temperature control applications

• Water Only Systems: Radiator, floor heating or chilled ceilings

• Individual room control for offices, residential, hotel rooms,

meeting rooms, etc.

General Description

The TCY-FT-U is a stand-alone electronic universal controller with one

temperature control loop. It may use up to 2 PID sequences. The TCY-FT-U

features 1 internal NTC temperature sensor, up to two external sensors

inputs and up to four binary outputs. The configuration has been reduced to

a minimum to allow for a simple and off the shelf usage. For more advanced

features the TCI product range may be used. The TCY-FT-U can be

configured using the standard operation terminal. No special tool or

software is required.

Name

Ordering

Item Name Item code Control Type Key-data

TCY-FT2-U-W01 40-10 0068-1 Cooling only

Compact PID controller with:

2 TI, 1 3-point output

TCY-FT2-U-W02 40-10 0068-2 Heating only

TCY-FT2-U 40-10 0068 2-Pipe system

TCY-FT4-U 40-10 0072 4-Pipe system 1 TI, 2 3-point outputs

Accessories

S-Tn10-2

SD-Tn10-12-2

SD-Tn10-20-2

SDB-Tn10-12

SDB-Tn10-20

SRA-Tn10

40-20 0001

40-20 0002

40-20 0003

40-20 0051

40-20 0004

40-20 0005

Flying lead sensor with 2 m cable

Flying lead duct sensor 12cm immersion depth, 2m cable

Flying lead duct sensor 20cm immersion depth, 2m cable

Duct sensor with housing, 12cm immersion depth

Duct sensor with housing, 20cm immersion depth

Room sensor

Selection of actuators and sensors

Temperature Sensors:

Use only our approved NTC sensors to achieve maximum accuracy. Recommended is SDB-Tn10-20 as Duct sensor, SRA-

Tn10 as Room sensor and SDB-Tn10-20 with AMI-S10 as immersion sensor.

3-point Actuators:

Actuators with constant running time are recommended. Observe power limits. Do not use actuators with power

consumption > 6VA. Adjust running time in SW. Default running time is 90s for fully open / close running time.

Housing: U = Vertical (2x4”) housing, Standard is square housing

Function: 2 = 2 = 2-Pipe, 4 = 4-Pipe

Input: T = Temperature, H = Humidity

Output: F = 3-point, M = Modulating, B = Binary

Series: TCY

T C

Y

T

-

F

-

U

(

)

2