American Standard Seychelle 0230.001 Installation Instructions

Download Specification sheet of American Standard Seychelle 0230.001 Indoor Furnishing for Free or View it Online on All-Guides.com. This version of American Standard Seychelle 0230.001 Manual compatible with such list of devices, as: Seychelle 0230.001, Seychelle 0230.100, Seychelle 0230.400, Seychelle 0230.800

American Standard Seychelle 0230.001 Specification sheet - Page 1
1
J11
Revised
© 2008 AS America Inc.
SEYCHELLE™
PEDESTAL SINK
VITREOUS CHINA
NOTES:
*
DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND “P" TRAP ARE
SUGGESTED.
PEDESTAL ANCHORING SCREWS NOT INCLUDED.
SUITABLE FOR REINFORCEMENT ONLY. ACTUAL DIMENSIONS MUST
BE TAKEN FROM FIXTURE.
FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORTS.
INSTALLATION INSTRUCTIONS SUPPLIED WITH LAVATORY.
IMPORTANT: Dimensions of xtures are nominal and may vary within the
range of tolerances established by ANSI Standard A112.19.2.
These measurements are subject to change or cancellation. No responsibility
is assumed for use of superseded or voided pages.
DRAIN
CHASE
OPEN
TO
FLOOR
203mm
(8)
FINISHED WALL
OR SPLASHBACK
597mm
(23-1/2)
483mm
(19)
PEDESTAL ANCHORING
SCREW HOLES 5/16 DIA.
210mm
(8-1/4)
64mm
(2-1/2)
508mm
(20)
FINISHED FLOOR
203mm
(8)
1-1/4 O.D
TAILPIECE
1-1/4 O.D.
WASTE
SUPPLIES
AS REQ'D
178mm
(7)
864mm
(34)
578mm
(22-3/4)
197mm
(7-3/4)
527mm
(20-3/4)
*
*
260mm
(10-1/4)
19mm (3/4) DIA. HOLES
FOR ANCHOR BOLTS
210mm
(8-1/4)
To Be Specied:
Color: White Bone Linen
Silver Fawn Beige Black
Faucet*:
Faucet Finish:
❏ Supplies:
1-1/4" Trap:
* See faucet section for additional models available
SEYCHELLE™ PEDESTAL SINK
Shell-shaped sculptured lavatory with
styled pedestal
Made from vitreous china
Rear overow
Supplied with mounting kit
Faucet ledge
Shown with 8871.572 Lexington faucet with
porcelain lever handles (not included)
0230.800 Faucet holes on 8" (203mm) centers
(Illustrated)
0230.400 Faucet holes on 4" (102mm) centers
0230.100 Center hole only
Nominal Dimensions:
597 x 483 x 864mm
(23-1/2" x 19" x 34")
Separate Components:
0230.008 Pedestal top-8" (203mm) centers
0230.004 Pedestal top-4" (102mm) centers
0230.001 Pedestal top-center hole only
733500-400 Pedestal only
Bowl sizes:
508mm (20") wide
305mm (12") front to back
152mm (6") deep
Compliance Certications -
Meets or Exceeds the Following Specications:
• ASME A112.19.2M for Vitreous China Fixtures
Revised 2/08