ESP GuardCam LED Manual
Download Manual of ESP GuardCam LED Camcorder, Security Camera for Free or View it Online on All-Guides.com.
1
2
3
4
5
6
7
8
9
10
11
12
Step 2 - Installing the GuardCam LED
IMPORTANT - IF IN ANY DOUBT ABOUT THE INSTALLATION OF THIS PRODUCT,
CONSULT A QUALIFIED ELECTRICIAN
This product must be earthed
Do not mount the unit against inflammable surfaces
The motion detector will not operate correctly if it is installed:
- Near the outlet of a central heating boiler
- Near air conditioning plant
- Pointing directly at moving vehicles
- Within sight of reflections from moving water
- Where other lamps could shine on the detector
BEFORE ATTEMPTING ANY INSTALLATION OR MAINTENANCE, ENSURE THAT THE
ELECTRICAL SUPPLY IS SWITCHED OFF AND THE CIRCUIT FUSES REMOVED OR THE
CIRCUIT BREAKER IS IN THE OFF POSITION.
Please make sure the voltage and polarity are correct before connection. Incorrect
voltage may cause electric shock. If you are not sure, please contact your retailer.
Note: It is recommend to mount GuardCam LED 2M above the ground for
optimum performance, do not mount the fixture below 1.2M.
See Fig. 2 for details of performance range.
5
Detection range: 12M x 160° (see Fig. 2)
2m
2m
4m 6m 8m 10m 12m
12m
Fig. 2
GuardCam LED Manual_Layout 2 01/08/2013 09:26 Page 5