Generalmusic WK6 Installation Instructions Manual

Download Installation instructions manual of Generalmusic GPS2500 Musical Instrument for Free or View it Online on All-Guides.com. This version of Generalmusic GPS2500 Manual compatible with such list of devices, as: PS2500, SK760, SK88, SK880, WK6

Generalmusic GPS2500 Installation instructions manual - Page 1
1
Generalmusic GPS2500 Installation instructions manual - Page 2
2
Generalmusic GPS2500 Installation instructions manual - Page 3
3
Generalmusic GPS2500 Installation instructions manual - Page 4
4
Generalmusic GPS2500 Installation instructions manual - Page 5
5
Generalmusic GPS2500 Installation instructions manual - Page 6
6
Generalmusic GPS2500 Installation instructions manual - Page 7
7
Generalmusic GPS2500 Installation instructions manual - Page 8
8
Generalmusic GPS2500 Installation instructions manual - Page 9
9
Generalmusic GPS2500 Installation instructions manual - Page 10
10
Generalmusic GPS2500 Installation instructions manual - Page 11
11
Generalmusic GPS2500 Installation instructions manual - Page 12
12
Generalmusic GPS2500 Installation instructions manual - Page 13
13
Generalmusic GPS2500 Installation instructions manual - Page 14
14
Generalmusic GPS2500 Installation instructions manual - Page 15
15
Generalmusic GPS2500 Installation instructions manual - Page 16
16
KIT 970291 (PAL) - KIT 970292 (NTSC) - A/V Kit with Vocal Processor
SK88 Operating System Disk
5) 16 contacts x 7.5cm flat cable
11) Vocal Processor Owner’s Manual
12) SK76 Operating System Disk
10) Vocal Processor Demo Disk
Video Cable NTSC (Din to Rca)
9) Video Cable PAL (Din to Scart)
6) 10 contacts x 40cm flat cable
7) 2 contacts x 10cm cable
Audio/Video board NTSC
4) 9 contacts x 15cm flat cable
1) Audio/Video board PAL
3) 34 contacts x 7.5cm flat cable
- Locate the CPU Board [A] and insert the buffer modules [2] into the connectors [H].
by means of the screw [8].
and that the jumper J1 [F] is set to position "A".
and to the CPU [A] and amplifier [D] boards.
- Check that the two jumpers JP1 e JP2 [E] are set to position "A"
- Fix the AUDIO/VIDEO Board [1] to the threaded locations of the support [B]
- Connect the cables [3-4-5-6-7] to the AUDIO/VIDEO Board [1]
- Connect the cable [3] to the CPU board.
8) 4 screws (M3x8)
2) 2 buffer modules
Part List:
(955993)
(120003)
(130428)
(955990)
(955992)
(271200)
(130317)
(841025)
(841049)
(841009)
(761152)
(761093)
(840204)
(841004)
(761143)
SIMM dram modules are
are installed, on B position if the
on A position if the buffer modules
intalled.
The jumper J1 [F] must be set
NOTE:
SK76-SK88
Model
ENGLISH
Instructions
Mounting
Mounting Instructions M-13
Leave the jumper J2 on its
position.
KIT 970291 (PAL) - KIT 970292 (NTSC) - A/V Kit with Vocal Processor
SK88 Operating System Disk
5) 16 contacts x 7.5cm flat cable
11) Vocal Processor Owner’s Manual
12) SK76 Operating System Disk
10) Vocal Processor Demo Disk
Video Cable NTSC (Din to Rca)
9) Video Cable PAL (Din to Scart)
6) 10 contacts x 40cm flat cable
7) 2 contacts x 10cm cable
Audio/Video board NTSC
4) 9 contacts x 15cm flat cable
1) Audio/Video board PAL
3) 34 contacts x 7.5cm flat cable
- Locate the CPU Board [A] and insert the buffer modules [2] into the connectors [H].
by means of the screw [8].
and that the jumper J1 [F] is set to position "A".
and to the CPU [A] and amplifier [D] boards.
- Check that the two jumpers JP1 e JP2 [E] are set to position "A"
- Fix the AUDIO/VIDEO Board [1] to the threaded locations of the support [B]
- Connect the cables [3-4-5-6-7] to the AUDIO/VIDEO Board [1]
- Connect the cable [3] to the CPU board.
8) 4 screws (M3x8)
2) 2 buffer modules
Part List:
(955993)
(120003)
(130428)
(955990)
(955992)
(271200)
(130317)
(841025)
(841049)
(841009)
(761152)
(761093)
(840204)
(841004)
(761143)
SIMM dram modules are
are installed, on B position if the
on A position if the buffer modules
intalled.
The jumper J1 [F] must be set
NOTE:
SK76-SK88
Model
ENGLISH
Instructions
Mounting
Mounting Instructions M-13
Leave the jumper J2 on its
position.