Clarion AVC-G1-G Installation Instructions

Download Installation instructions of Clarion AVC-G1-G Monitor for Free or View it Online on All-Guides.com.

Brand: Clarion

Category: Monitor

Type: Installation instructions

Model: Clarion AVC-G1-G , Clarion AVC-G1-LT , Clarion AVC-G1-T

Pages: 3

Download Clarion AVC-G1-G Installation instructions

Clarion AVC-G1-G Installation instructions - Page 1
1
Clarion AVC-G1-G Installation instructions - Page 2
2
Clarion AVC-G1-G Installation instructions - Page 3
3
clarion
CAR
AUDIO 0
BEYOND
INSTALLATION INSTRUCTIONS
AVC-lil-Ii / AVC-lil-T / AVC-lil-LT
1999-2000 GMC Yukon Denali I Cadillac Escalade
The
AVC-G1 is designed
to
replace the rear portion
of
the factory center console with a specially
designed monitor shroud that adds the option
of
rear entertainment while retaining the factory cos-
metic appeal. Please note which Clarion monitor is to be used with this housing and follow the mount-
ing directions for that model.
Console Disassembly and Clarion Monitor Shroud Preparation
1.
Open the center console lid and remove the (3) screws attaching it to the console.
2.
Remove the rubber cupholder lining and the (2) screws located beneath it.
3.
Remove the
(2)
screws securing the console trim.
4.
Carefully separate the console trim from the lower section section by gently lifting the trim panel
and disconnecting the LED.
5.
Remove the (4) 10mm bolts securing the console to the floor.
6.
Remove all remaining screws from the CD changer trim.
7.
Remove the rubber lining
in
the bottom of the console and the (2) screws located beneath it.
8.
Slide the entire lower console section backwards toward the rear seat to release it from it's
mount.
9.
Lift the rear of the console and remove the
(2)
lower screws visible from underneath.
10.
Remove the (2) screws at the top of the rear console panel and gently remove it.
11.
Unplug the rear stereo control, seat controls, and power port. Carefully unsnap the panels and
switches from the factory housing and relocate them to the Clarion Monitor Shroud.
Mounting the Monitor
1.
Connect the monitor wiring as directed
in
the installation instructions for that unit and mount the
hideaway box for the monitor or tuner (if equipped)
in
a suitable location.
2.
Locate the proper mounting adapter for the monitor being used and attach the monitor to the
adapter as illustrated
on
page
2.
3.
Connect the monitor signal/power cable(s) as directed
in
the installation manual for that unit.
4.
Secure the adapter to the Clarion Monitor Shroud using the (4) screws provided
in
the kit.
Console Re-assembly
1.
Plug-in the rear stereo control panel, seat controls, and power port then set the Clarion Monitor
Shroud back into place
on
the main console.
2.
Secure the (2) screws at the top of the rear control panel then lift the rear end of the console and
replace the (2) screws attaching the rear console panel.
4.
Slide the entire lower console section forward into it's mount.
5.
Replace the (2) screws
in
bottom of the console and replace the rubber lining.
6.
Replace all the screws securing the CD Changer trim panel and the (4) 10mm bolts.
7.
Reconnect the LED, snap the top console trim back into place, and replace the (2) screws
8.
Replace the (2) cupholder screws then the rubber cupholders.
9.
Replace the (3) screws attaching the console lid.
rc:>Clarion
Corporation
of
America,
Gardena,
CA
page
1