NEC SV8100 Quick Manual
Download Manual of NEC SV-8100 Conference System, Control Unit for Free or View it Online on All-Guides.com.
Brand: NEC
Category: Conference System , Control Unit , Cordless Telephone , Digital telephone , Gateway , Headsets , IP Phone , Keypad , Network Accessory , Network Hardware , Office Equipment , PBX , Server , Telephone , Telephone Accessories , Telephone System , Touch terminals , Voicemail
Type: Manual for NEC SV-8100
Pages: 4
1
2
3
4
NEC
SV8100 Quick Guide
Handset Layout
Soft Touch Keys
The NEC handsets have menus that can be accessed by
pressing the buttons below the LCD screen. There are 4 soft
touch keys that change depending on the mode you are in.
Line Keys / DSS Keys
The top line is programmed as “Line Keys” they shows lines
4 & 5 are in use. The bottom line is programmed as Direct
Station Select (DSS) keys in this example Joel’s extension is
busy.
Navigation / Scroll Keys
Used for:
o Speed dials.
o Inbound call register.
o Outbound call register.
o Volume control.
Making Outside Calls
o Lift handset.
o Dial 0.
o Dial telephone number.
Put a call on Hold
o Press the Hold key during a call.
o Outside calls will flash on the Line key.
o Press the flashing key to retrieve the held call.
Transferring a Call
Without DSS keys
Method 1. ( Blind transfer )
o Press the Transfer Key during a call.
o Dial the required extension number.
o Hang up to send the call through.
Method 2 ( Announced transferred )
o Press the Transfer Key during a call.
o Dial the required extension number.
o Wait for answer, announce the call.
o Hang up to send the call through.
o or select green flashing line if called party does not
want to take the call.
With DSS keys
Method 1 (Blind transfer)
o Press the DSS key during a call.
o Hang up to send the call through.
Method 2 (Announced transferred)
o Press the DSS key during a call.
o Wait for answer, announce the call.
o Hang up to send the call through.
o or select green flashing line if called party does not
want to take the call.
www.phonehelp.com.au