Blaze King PEJ 1006 Specifications

Download Specifications of Blaze King KE 1107 Cooktop for Free or View it Online on All-Guides.com. This version of Blaze King KE 1107 Manual compatible with such list of devices, as: KE 1107, KEJ 1107, PE 1006, PEJ 1006, Ultra 1006

Blaze King KE 1107 Specifications - Page 1
1
Blaze King KE 1107 Specifications - Page 2
2
Classic Wood Stoves
Princess Ultra Shown With Optional Convection Deck and
Gold Door. Ash Pan & Side Shields As Shown Are Standard.
NOTICE: Improper installation of your wood burning appliance or failure to operate it according to the guidelines detailed in the owners manual, may negate your warranty and endanger your home or
family. Contact local building or fire officials about restrictions and installation requirements in your area. Photos and illustrations are for descriptive purposes only. Changes dictated by the manufactur-
er’s continuing design improvement programs may not be shown. These products are covered by one or more patents in the United States, Canadian and other countries. All Blaze King
®
Industries prod-
ucts are manufactured under license agreement from: Blaze King
® Industries, 146 A Street, Walla Walla, WA. 99362 and in Canada by Blaze King
®
Systems Inc. 1290 Commercial Way, Penticton BC
V2A3H5. Design and specifications subject to change without notice. Rev. 9/03 CP67195 9/02 10M
Blaze King®
Industries
www.blazeking.com
Specifications PEJ/PE 1006 Ultra 1006 KEJ/KE 1107
Square Ft. Heating Capacity 1 1,500+ 1,500+ 2,000+
Wood Length
(Front to Back/Left To Right) 16”/20” 16”/20” 17”/23”
Wood Capacity (approximate) Oak 60# Oak 60# Oak 90#
Approximate Weight 350# 410#
Width 27” 27” 30”
Depth 29” 29” 30”
Height
(top of flue collar) 29
3/4(+4 3/4” w/legs) 343/4
34” (+4 3/4” w/legs)
Flue Size 6” 6” 8”
Door Opening 163/8” x 9” 16
3/8” x 9” 17
3/4” x 10”
Minimum Floor Protection
2
32” x 44” 32” x 44” 34” x 45”
Combustion Chamber Cu. Ft. 2.85 2.85 4.32
Min. Rear Wall Clearance 3 6” 6” 6”
Emissions
(Weighted Average EPA) 2.42G 2.42G 1.76G
Overall Efficiency 82.5% 82.5% 82.5%
Low Burn Time
(Average)
20 Hours 20 Hours 40 Hours
*Figures below are for roof exit only. Refer to Owners Manual
for other applications.
Single Wall Mobile Home/
Standard Install Reduced Clearances
A.16.00”/386mm 13.00”/314mm
PE
A.16.50”/398mm 13.50”/326mm
KE
B.26.50”/640mm 20.50”/495mm
PE
B.27.00”/652mm 21.00”/507mm
KE
C.24.75”/598mm 16.75”/404mm PE
C.25.00”/603mm 17.00”/410mm
KE
D. 9.00”/217mm 6.00”/145mm
KE/PE
E.16.00”/386mm 10.00”/241mm
KE/PE
F. 14.00”/338mm 6.00”/145mm
KE/PE
G. 2.50”/ 60mm 2.50”/ 60mm
PE
G. 2.00”/ 48mm 2.00”/ 48mm
KE
H.16.00”/386mm 16.00”/386mm
KE/PE
COMBUSTIBLE WALL
COMBUSTIBLE WALL
COMBUSTIBLE WALL
COMBUSTIBLE WALL
F
D
A
G
H
C
C
F
B
E
Floor ProtectionRoof Exit*Roof Exit*
YourAuthorized Dealer:
The Facts on Btu’s: There are only two rating methods that mean something to you, the consumer. The first is the btu
output that is achieved during EPAtesting. This testing is quite complicated and costly milled woods are burned. This is a stan-
dard for all manufacturer testing and is not intended to provide consumers with a model for how a stove will burn in their home.
The second method is what Blaze King refers to as the “Real World” method. These btu’s are achieved during in house test-
ing using the same thing a consumer burns, split, dry cordwood. In our tests, we use fir. The “Real World” btu’s listed are what
the average consumer can expect to achieve, with slight variations depending upon geographical location, type of wood, eleva-
tion and amount of fuel added. Higher Btu’s are possible. If you were to stand in front of your stove and frequently add fuel,
burn the unit on high and have optimal conditions, the PE1006 could produce as high as 87,850 Btu’s and the KE1107 could
exceed 90,000 btu’s! However, maximum btu’s would only be achievable at a certain “peak” during the burn. Blaze King does
not wish to mislead you so we give you all the facts.
PEJ/PE/Ultra 1006
KEJ/KE 1107
Average EPA Test Fuel (Low Burn) 11,989 Btu’s/hr 8,600 Btu’s/hr
Average EPA Test Fuel (High Burn) 35,550 Btu’s/hr 37,800 Btu’s/hr
Average Real World Btu’s (Low Burn) 6,400 Btu’s/hr 8,400 Btu’s/hr
Average Real World Btu’s (High Burn) 40,000 Btu’s/hr 47,000 Btu’s/hr
Classic Wood Stoves
King Classic 1107 Shown With Optional Dual Fans
Common Specifications
Certified to comply with July 1990 Standards,
US (EPA) Environmental Protection Agency
1. Subject to locality, home design, home
insulation condition and fuels.
2. Any non-combustible material.
3. Requires Close Clearance /Mobile Home
Kit. See stove label or owners manual for
specifics. Note: Princess 1006Ultra
comes standard with side shields.
For Alcove & Wall Exit Installations
refer to Owners/Operators Manual.
All Units Are EPA And Washington State Approved.