BENDIX ATR-1 ANTILOCK TRACTION RELAY Manual

Download Manual  of BENDIX ATR-1 ANTILOCK TRACTION RELAY Other for Free or View it Online on All-Guides.com.

BENDIX ATR-1 ANTILOCK TRACTION RELAY Manual  - Page 1
1
BENDIX ATR-1 ANTILOCK TRACTION RELAY Manual  - Page 2
2
BENDIX ATR-1 ANTILOCK TRACTION RELAY Manual  - Page 3
3
BENDIX ATR-1 ANTILOCK TRACTION RELAY Manual  - Page 4
4
BENDIX ATR-1 ANTILOCK TRACTION RELAY Manual  - Page 5
5
BENDIX ATR-1 ANTILOCK TRACTION RELAY Manual  - Page 6
6
BENDIX ATR-1 ANTILOCK TRACTION RELAY Manual  - Page 7
7
BENDIX ATR-1 ANTILOCK TRACTION RELAY Manual  - Page 8
8
BENDIX ATR-1 ANTILOCK TRACTION RELAY Manual  - Page 9
9
BENDIX ATR-1 ANTILOCK TRACTION RELAY Manual  - Page 10
10
BENDIX ATR-1 ANTILOCK TRACTION RELAY Manual  - Page 11
11
BENDIX ATR-1 ANTILOCK TRACTION RELAY Manual  - Page 12
12
1
®
SD-13-4811
DESCRIPTION
The ATR-1
antilock traction relay is a specialized air brake
valve developed for use on Bendix antilock/traction equipped
vehicles.
It is essentially three separate valves working in combination
in a single housing. An R-14
style service relay is the base
valve and is fitted with a modified cover containing a double
check valve and a traction control solenoid. The ATR-1
valve
contains both air and electric components to provide the
service braking and traction control (differential braking)
functions. A Bendix antilock traction controller can be
mounted to the ATR-1
valve or a cover plate can be installed
and the antilock controller mounted elsewhere on the vehicle.
When an ATR-1
valve is combined with an antilock traction
controller the resulting assembly is referred to as an antilock
traction assembly.
The ATR-1
valve replaces the standard relay valve used to
control the rear axle service brakes and performs the standard
relay function. Like the standard relay valve it replaces, the
ATR-1
valve (sometimes with attached antilock controller)
is normally mounted near the service brakes it serves. A
mounting bracket, furnished with the valve, permits either
frame or cross member mounting. All air connections on
the ATR-1
valve are identified for ease of installation. The
letter identification and air line connections are shown below
for reference.
EMBOSSED
ATR-1
VALVE AIR CONNECTION IDENT.
Supply (to reservoir) SUP
Delivery (to brake Chamber) DEL
Service (to brake valve rear delivery) SER
Control (not drilled or threaded on ATR-1
valve) CON
The ATR-1
valve is part of the R-12
family of relay valves
which includes the R-12
, R-14
, BP-R1
, AR-1
.
The internal components of the relay portion of all of these
valves are interchangeable with the R-12
valve and therefore
the same basic components are used to service all of them.
The ATR-1
valve is available with various crack pressures
to accommodate specific applications, however the standard
is 4 psi.
Bendix
®
ATR-1
AntiLock Traction Relay Valve
SUPPLY
PORT
BODY
MOUNTING
BRACKET
SERVICE
PORT
CONTROLLER
MOUNTING HOLES (4)
COVER PLATE FOR
REMOTE MOUNT
REMOTE MOUNT ATR-1
RELAY VALVE
TRACTION CONTROL
SOLENOID
UNDRILLED
“CON” PORT
DELIVERY
PORT (4)
2 PIN SOLENOID
CONNECTOR
SUPPLY
PORT
FIGURE 1 - ATR-1
ANTILOCK TRACTION RELAY VALVE