Primera Bravo Se Quick Start

Download Quick start of Primera Bravo SE Disc Duplicator, Printer for Free or View it Online on All-Guides.com.

Primera Bravo SE Quick start - Page 1
1
Primera Bravo SE Quick start - Page 2
2
P/N 510964 - 071907
Publishing a Disc
Congratulations, you are now ready to start Publishing discs!
For Instructions on copying a disc using a PC refer to section 3 in the User’s Manual.
For Instructions on copying a disc using a Macintosh refer to section 4 in the User’s Manual.
For help with problems publishing discs using a PC or Macintosh please visit Primera's online
Knowledgebase at www.primera.com/knowledgebase.html.
8
Automated Optical Disc
Duplication & Printing System
AUTOPRINTER
TM
Automated Optical Disc
Duplication & Printing System
Quick Start
© 2007 All rights reserved
5c
6
Installing the Ink Cartridge
With the cover open, press the button on the
top of the Publisher to move the Ink
Cartridge Carrier to the load position.
Open the cartridge cover by pressing down
on the tab.
Remove the ink cartridge from its
packaging.
Slowly remove the tape
covering the cartridge's
print head.
DO NOT TOUCH THE
COPPER AREA!
Insert the ink cartridge into the carrier,
copper end first and snap the cartridge
cover in place.
Close the Publisher’s front cover.
7
Aligning the Cartridge
If you are using a PC the Installer will prompt you to align the cartridge.
If you are using a Mac you will be prompted to align the cartridge before you print for the first time.
Note: An alignment print is required every time you install a new cartridge. The software will always prompt you to
align the cartridges. Make sure there is an unprinted disc in the bin for this alignment.
Connect the
Publisher to
your PC with
your beige USB
2.0 Cable.
Add the Publisher via the Printer Setup Utility.
1. Open the Printer Setup Utility located in the
Applications - Utilities folder.
2. Click Add. Select the Disc Publisher SE from
the list of available printers. Click Add again.
Installing the Printer Driver (Mac)