BELKIN LASERLINKWIN95 Manual

Download Driver installation of Belkin LASERLINKWIN95 Printer for Free or View it Online on All-Guides.com.

Brand: Belkin

Category: Printer

Type: Driver installation

Model: Belkin LASERLINKWIN95 , Belkin LASERLINK MIO

Pages: 4 (0.04 Mb)

Download Belkin LASERLINKWIN95 Driver installation

Belkin LASERLINKWIN95 Driver installation - Page 1
1
Belkin LASERLINKWIN95 Driver installation - Page 2
2
Belkin LASERLINKWIN95 Driver installation - Page 3
3
Belkin LASERLINKWIN95 Driver installation - Page 4
4
1
INSTALLING LASERLINK MIO WITH WINDOWS 95
I. Verify that the Laserlink MIO is working properly.
1. Check connections.
- cables and adpaters
Make sure that you are using the proper cables and adapters.
2. Try to print out a configuration page using the printer control panel to
determine if there is a good connection from the Laserlink MIO unit to the printer.
Note: The file TALK.EXE utility will not run properly under Windows 95.
In order to run talk properly, the computer has to be restarted in MS-DOS mode
using the Start/Shutdown... menu option.
If TALK.EXE is executed in an MS-DOS prompt shell only, the utility will
report inaccurate results.
HOW TO SET THE COMPUTER’S PARALLEL OR SERIAL PORT SETTINGS:
If you have a serial connection, the baud rates and handshake method
must
match between the
computer output port and the Laserlink MIO input port
. The following diagrams show how to set
the computer’s connection port (serial or parallel) with the Laserlink MIO to the proper settings.
Figure 1:
Click on the icon My Computer.
Belkin Components
TECHNICAL SUPPORT
(310)898-1100 ext. 263