Olympus E-20 - Dual Monaural Earphones Software Installation Manual

Download Software installation manual of Olympus C 4000 - CAMEDIA Zoom Digital Camera Camera Accessories, Digital Camera for Free or View it Online on All-Guides.com. This version of Olympus C 4000 - CAMEDIA Zoom Digital Camera Manual compatible with such list of devices, as: D-380 - Camedia 2MP Digital Camera, D-550 - Camedia 3MP Digital Camera, E-20 - Dual Monaural Earphones, C-4000 - Camedia 4MP Digital Camera, C-50 - Camedia 5MP Digital Camera

Olympus C 4000 - CAMEDIA Zoom Digital Camera Software installation manual - Page 1
1
Olympus C 4000 - CAMEDIA Zoom Digital Camera Software installation manual - Page 2
2
1 SYSTEM REQUIREMENTS
Make sure your computer meets the following minimum system requirements.
Pentium or later CPU Power Macintosh
64MB or greater
RAM 40MB or greater for applications
120MB minimum available HD space Hard disk 120MB minimum available HD space
Windows 98, 98SE, Me, 2000, XP Required software Mac OS 9.0 (8.6) - 9.2/OS X 10.1
USB Port Interface USB Port
* This software is intended for single-user usage. Windows server versions and installation on a
network fileserver is not supported.
*Windows 95, Windows 98 upgrade (from Windows 95), and Windows NT do not support
USB devices.
* Mac OS 8.6 users need to install the Apple USB Mass Storage Support 1.3.5 update to connect
a USB Olympus camera (available for download from www.apple.com).
2 INSTALLING THE SOFTWARE
Installing the camera software will only need to be performed once.
a. Installing CAMEDIA Master 4.0
1. Disable any virus protection software installed on your computer before proceeding withthe
installation.
2. Insert the CAMEDIA Master software CD into your CD-ROM drive. An Olympus Software Setup
Menu should automatically launch.
Note: Depending on your PC settings, the menu window may not launch automatically.
In this case, open "My Computer", open the CD-ROM drive
icon (should be labeled "CM&INST"),
and then double-click SETUP.EXE.
3. Click "CAMEDIA Master 4.0" to proceed with the
installation.
4. Click the appropriate language choice.
CAMEDIA Master requires the Apple QuickTime program.
If QuickTime has already been installed, the installation
routine will skip directly to Step #9. If not, the QuickTime 5
Setup program will automatically run.
5. If you do see a "Welcome to QuickTime 5" installation window, skip to step #9. To continue
installing QuickTime, follow the on-screen prompts. We recommend using all of the suggested
settings.
6. When prompted for QuickTime registration information, leave all fields blank. Simply click Next
to continue.
7. The QuickTime files will now be copied to the appropriate folders. A "QuickTime Settings" window
will appear. Click Next for the first two and Finish for the last.
8. A screen will appear informing you when the installation is complete. Click "Close" to finish the
QuickTime installation.
9. The CAMEDIA Master setup window will appear. Follow the on-screen instructions to continue.
10. You will be prompted for User Information.
Type in your name in the Name field. Locate the
CAMEDIA Master 4.0 CD envelope. Open the
envelope and find the CAMEDIA Master 4.0
serial number that is printed on an affixed label.
NOTE: Please pay special attention to differences between "1" and "I", "0"(zero) and "O", "5" and "S".
Enter the alphanumeric digits in the appropriate fields. Click Next and continue following the on-
screen prompts. We recommend using all of the suggested settings.
11. When the "setup of CAMEDIA Master 4.0 is complete" dialog appears, click "Finish".
12. A README file is displayed. This file contains important update information. When you are
finished reading, close the document by clicking {close window symbol}. The screen returns to
Olympus Windows Installer.
b. Installing the USB Driver for Windows 98
If you are not using a Windows 98 PC, please skip this section. If you are using a Windows 98 PC,
the camera will require the installation of a USB driver before it can be recognized. Follow the
instructions below:
1. Click USB driver for Windows 98 from the Olympus Software Setup Menu.
2. Click Continue and the USB driver installation will automatically start.
3. Click OK to restart your computer and the installation is complete.
c. Installing Acrobat Reader
TM
5.0
Adobe Acrobat Reader is used to read the electronic documentation supplied for the camera and
software. Users who already have Acrobat Reader installed on their computer can skip this section.
1. Click Acrobat Reader on the Olympus Software Setup Menu.
2. Click an appropriate installation language choice.
3. The Acrobat Reader 5.0 installation window appears. Click Next.
4. Follow the on-screen prompt to continue installing this program. We recommend using all of the
suggested settings.
5. When the "Thank you for choosing Acrobat Reader!" message appears, click OK.
d. Reference Manual
The complete Reference Manual for your camera is available on the CAMEDIA Master 4.0 CD. This
manual contains full information on the usage and functions of your camera. Adobe Acrobat Reader
must be installed to view this document. The Reference Manual can be viewed on screen or printed.
To access the Reference Manual:
1. Click on "Reference Manual" from the Olympus Software Setup Menu.
2. Click on the appropriate language.
e. Closing the Olympus Software Setup Menu
1. After you have completed all the selections from the Setup Menu, click "Close" to exit the
window. You may remove CD at this time. Store the disc for future reference.
a. Installing CAMEDIA Master 4.0
1.Turn off any virus protection software.
2.Insert the CAMEDIA Master software CD into your CD-ROM drive.
3.The CD-ROM window automatically appears.
Note: If not, find the CM4&INST icon on your desktop and double-click it.
4. Double-click the folder that matches your operating system.
5. Double-click on the CAMEDIA Master folder.
6. Double-click on the appropriate installation language icon.
7. Double-click the "CAMEDIA Master Installer" icon.
8. Follow the on-screen prompt to continue installing the program. We recommend using all of the
suggested settings.
b. Installing QuickTime 5.0
CAMEDIA Master requires the Apple QuickTime program to be installed. You do not need to install
QuickTime 5.0 if this program has already been installed. If your Macintosh has an earlier version of
QuickTime, you must install version 5.0.
NOTE: Mac OS X users can skip this section. Use the QuickTime pre-installed on your Macintosh.
1. Follow steps 1 to 5 of the Macintosh CAMEDIA Master installation procedure. Double-click the
"QuickTime Installer" icon.
2. The Welcome to QuickTime 5 installation window appears. Follow the on-screen prompts to
continue installing the program. We recommend using all of the suggested settings.
3. Select "Recommended" for the installation type and then click Continue.
4. When prompted for QuickTime registration information, leave all fields blank. Simply click Next to
continue.
5. The QuickTime files will now be copied to the appropriate folders. When the QuickTime Settings
dialog boxes appear, click Next twice and then Finish.
6. When the Installation Complete screen appears, click Quit.
c. Installing Acrobat Reader
TM
4.0
Adobe Acrobat Reader is used to read the electronic documentation supplied for the camera and
software. Users who already have Acrobat Reader 4.0 installed on their computers can skip this sec-
tion.
NOTE: Mac OS X users can skip this section. Use the Acrobat Reader pre-installed on your
Macintosh.
1. Follow steps 1 to 4 of the CAMEDIA Master installation procedure. Double-click the appropriate
language icon.
2. The Acrobat Reader 4.0 installation window appears. Follow the on-screen prompts to continue
installing the program. We recommend using all of the suggested settings.
3. A message will appear when the installation is successful. Click Quit.
d. Reference Manual
The complete Reference Manual for your camera is available on the CAMEDIA Master 4.0 CD. This
manual contains full information on the usage and functions of your camera. Adobe Acrobat Reader
must be installed to view this document. The Reference Manual can be viewed on screen or printed.
To access the Reference Manual:
1. Follow steps 1 to 4 of the CAMEDIA Master installation procedure.
2. Double-click the "Reference Manual" folder and then double-click the appropriate language icon.
e. Installation completion.
1. After you have completed installing the programs and viewing the documentation, you may
remove CD. Store the disc for future reference.
Windows
Macintosh
Windows
Macintosh
SOFTWARE INSTALLATION & DOWNLOAD GUIDE
CAMEDIA Master is a photo application that allows you to download, view, organize, retouch, and print pictures taken with your digital camera. These instructions will guide you through the installation and first time usage of this software. It is strongly recommended that you follow these procedures step-by-step.
VT327802
CAMEDIA Master CD-ROM for Windows® & Macintosh™