OKIDATA Microline ML395 Handbook
Download Handbook of Oki Microline ML395 Printer for Free or View it Online on All-Guides.com. This version of Oki Microline ML395 Manual compatible with such list of devices, as: Microline ML395, Microline ML395C, Microline ML395, Microline ML395C
Category: Printer
Type: Handbook
Model: Oki Microline ML395 , Oki Microline ML395C , OKIDATA Microline ML395 , OKIDATA Microline ML395C
Pages: 79
Double Width
(Expanded)
Printing
ASCII: ESC W n
Dec: 27 87 n
Hex: 1B 57 n
n = 2: Start triple width printing
n = 1: Start double width printing
n = 0: Stop double or triple width printing
Immediate Double
Width
ASCII: SO or ESC SO
Dec: 14 or 27 14
Hex: 0E or 1B 0E
Prints double width only to end of line; can also be
canceled by DC4, ESC W 0 and ESC ! n.
Stop Immediate
Double Width
Printing
ASCII: DC4
Dec: 20
Hex: 14
Only cancels double width set by SO or ESC SO.
Start Triple Width
Printing
ASCII: ESC m
Dec: 27 109
Hex: 1B 6D
Canceled by ESC W 0 and ESC ! n.
Double Height
Printing
ASCII: ESC w n or
ESC US n
Dec: 27 119 n or 27 31
n
Hex: 1B 77 n or 1B 1F
n
OKI unique command
n = 2: Start triple height
n = 1: Start double height
n = 0: Stop double or triple height
Graphics, 8 &
24-Pin Mode
Note:
For all
graphics commands
the number of dot
columns of graphic
data is as follows:
dots = n
1
+ (n
2
x 256)
Graphics
Select/Print
ASCII: ESC * m n
1
n
2
[graphic data]
Dec: 27 42 m n
1
n
2
[graphic data]
Hex: 1B 2A m n
1
n
2
[graphic data]
Selects 8-pin and 24-pin graphic modes and prints
graphic data.
m = 0: Single density, 8-pin 60 dpi
m = 1: Double density, 8-pin, 120 dpi
m = 2: Double speed, double density, 8-pin,
quasi-120 dpi (dots can not be printed
directly adjacent to one another)
m = 3: Quadruple density, 8-pin, quasi240 dpi (dots
can not be printed directly
adjacent to one another)
m = 4: CRT I, 8-pin, 80 dpi
m = 6: CRT II, 8-pin, 90 dpi
m = 32: Single density, 24-pin, 60 dpi
m = 33: Double density, 24-pin, 120 dpi
m = 38: CRT III, 24-pin, 90 dpi
m = 39: Triple density, 24-pin, 180 dpi
m = 40: Hex-density, 24-pin, quasi-360 dpi (dots
can not be printed directly
adjacent to one another)
n
1
, n
2
= 0 to 255: specifies amount of subsequent Bit
Image bytes received,
calculated as n
1
+ (n
2
x 256)
Graphics, 8-Pin
Mode
ML395 ( 96-02-07 )