Océ CS230 User's Manual
Download Operation & user’s manual of Océ CS230 Scanner for Free or View it Online on All-Guides.com.
3
Scanning documents
3-4 CS230 (Phase3)
6 [Scan] key Press to enter Scan mode. While the machine is in
Scan mode, the indicator on the [Scan] key lights
up in green.
7 [Copy] key Press to enter Copy mode. (As a default, the ma-
chine is in Copy mode.) While the machine is in
Copy mode, the indicator on the [Copy] key lights
up in green.
For details, refer to the User manual [Copy Opera-
tions].
8 [Reset] key Press to clear all settings (except programmed set-
tings) entered in the control panel and touch panel.
9 [Interrupt] key Press to enter Interrupt mode. While the machine is
in Interrupt mode, the indicator on the [Interrupt]
key lights up in green and the message "Now in In-
terrupt mode." appears on the touch panel. To can-
cel Interrupt mode, press the [Interrupt] key again.
10 Auxiliary power button Press to turn on/off machine operations, for exam-
ple, for copying, printing or scanning. When turned
off, the machine enters a state where it conserves
energy.
11 [Stop] key Press the [Stop] key during scanning to stop the
scan operation.
12 [Start] key Press to start scanning. When this machine is ready
to begin scanning, the indicator on the [Start] key
lights up in green. If the indicator on the [Start] key
lights up in orange, scanning cannot begin.
Press to restart a stopped job.
13 Main Power indicator Lights up in green when the machine is turned on
with the auxiliary power button.
14 Data indicator Flashes in green while a print job is being received.
Lights up in green when data is being printed.
15 [Proof Copy] key Press to print a single proof copy to be checked be-
fore printing a large number of copies.
16 Keypad Use to type in the number of copies to be pro-
duced.
Use to type in the zoom ratio.
Use to type in the various settings.
17 [C] (clear) key Press to erase a value (such as the number of cop-
ies, a zoom ratio, or a size) entered using the key-
pad.
18 [Mode Check] key Press to display screens showing the specified set-
tings.
19 [Utility/Counter] key Press to display the Utility screen and Meter Count
screen.
20 [Mode Memory] key Press to register the desired copy settings as a pro-
gram or to recall a registered copy program.
21 Contrast dial Use to adjust the contrast of the touch panel.
22 [Enlarge Display] key Press to enter Enlarge Display mode.
No. Part name Description