Océ VarioPrint 2100 User Manual
Download Operation & user’s manual of Océ VarioPrint 2100 All in One Printer for Free or View it Online on All-Guides.com. This version of Océ VarioPrint 2100 Manual compatible with such list of devices, as: VarioPrint 2100, VarioPrint 2110, VarioPrint 2100, VarioPrint 2110
Category: All in One Printer
Type: Operation & user’s manual
Model: Océ VarioPrint 2100 , Océ VarioPrint 2110 , Oce VarioPrint 2100 , Oce VarioPrint 2110
Pages: 308
132 Chapter 5 The print function
Combine print jobs and copy jobs in one bundle
Combine print jobs and copy jobs in one bundle
Introduction
Task for operators
You can combine print jobs and copy jobs into 1 job. The following procedure
describes how to create 1 job from a print job and a copy job.
The procedure consists of the following steps.
1. Move your print job from the 'Mailbox' to the 'Memory'.
2. Scan your copy job to the 'Memory'.
3. Combine your print job and copy job into 1 job.
Move your print job from the 'Mailbox' to the 'Memory'
1. Send your print job to the 'Mailbox'.
2. Use the star arrow keys to select your job in the 'Mailbox'.
3. Press the function key 'Edit...'.
4. Press the function key 'Target'.
5. Press the function key 'Type' to select 'Memory'.
6. Press the Start key .
The system creates a copy of your print job in the 'Memory'.
Scan your copy job to the 'Memory'
1. Put the originals in the automatic document feeder or on the glass plate.
2. Press the function key 'Copy'.
3. Select a copy template.
4. Define the settings for 'Original' and 'Print'.
5. In the 'Print' section, press the function key 'Target'.
6. Press the function key 'Type' to select 'Memory'.
7. Press the Start key .
The system creates a job in the 'Memory'.
Combine your print job and copy job into 1 job
1. Press the function key 'Memory'.
2. Press the function key 'Select all' or 'Select new' to select the jobs to combine.
The function key 'Edit...' changes into 'Bundle print...'.
3. Press the function key 'Bundle print...'.
4. Enter the number of copies.
5. Press the function key 'Start'.
The job is sent to the job queue.