National Instruments NI PCIe-8255R Quick Start Manual
Download Quick start manual of National Instruments NI PCIe-8255R Network Card, PCI Card for Free or View it Online on All-Guides.com.
Brand: National Instruments
Category: Network Card , PCI Card , Recording Equipment
Type: Quick start manual for National Instruments NI PCIe-8255R
Pages: 16
Download National Instruments NI PCIe-8255R Quick start manual
NI PCIe-8255R Quick Start Guide
The NI PCIe-8255R is an IEEE 1394a
1
and IEEE 1394b interface device
for PCI Express (PCIe) with reconfigurable I/O (RIO). This document
explains how to install and configure the NI 8255R.
What You Need to Get Started
You need the following items to set up and use the NI 8255R:
❑ NI Vision Acquisition Software 8.2 or later
❑ NI Vision Acquisition Software Release Notes
❑ Computer running Windows 2000/XP with at least one PCIe slot
❑ IEEE 1394 camera
❑ 9-pin IEEE 1394 cable for interfacing to IEEE 1394b cameras
❑ 6-pin to 9-pin cable or 6-pin to 9-pin adapter for interfacing to
IEEE 1394a cameras
❑ External power supply to support powering isolated outputs
❑ Optional software packages and documentation:
– NI Vision Development Module
– NI Vision Builder for Automated Inspection
–LabVIEW
– LabVIEW FPGA Module
– LabWindows
™
/CVI
™
1
To connect an IEEE 1394a camera to the NI 8255R, you will need a 6-pin to 9-pin cable or a 6-pin to 9-pin adapter.