Multitech MTCBA-G-F1 User Manual
Download Operation & user’s manual of Multitech MTCBA-G-F1 Modem, Network Card for Free or View it Online on All-Guides.com.
Brand: Multitech
Category: Modem , Network Card , Wireless Router
Type: Operation & user’s manual
Model: Multitech MTCBA-G-F1 , Multitech MTCBA-G-F2
Pages: 29
Chapter 2 – Installation
Multi-Tech Systems, Inc. MultiModem® GPRS User Guide 12
Chapter 2: Installation
Mechanical Mounting
To mount the Wireless MultiModem, do the following:
1. Obtain mounting screws (two are needed) that are appropriate for the surface on which you will
mount the modem. The mounting screw on the connector end of the unit must have a screw-
head no thicker than 2 mm. The allowable thickness is limited because the screw must fit
beneath the RS232 cable. The allowable thickness of the other screw-head is not limited in this
way.
= 2 mm
Screw Head
Clearance
Side View
For example, one might use two 6-32 self-tapping screws 5/8” in length to mount the unit in a
truck to the wall of the cab behind the passenger’s seat.
2. Typically, the unit is mounted against a flat surface into which holes can be drilled. The
mounting holes (center-to-center) must be separated by 125mm or 4 -15/16 inches.
Screw Separation
= 125 mm
or 4
15
16
inches
Drill the mounting holes at the desired mounting location (if applicable).