Motorola HDT100 Important Safety Instructions
Download Quick setup manual of Motorola HDT100 Receiver, TV Receiver for Free or View it Online on All-Guides.com.
Brand: Motorola
Category: Receiver , TV Receiver
Type: Quick setup manual for Motorola HDT100
Pages: 2
Be sure to allow adequate ventilation and airflow around the HDT100 to prevent overheating.
- Do not place anything on top of the HDT100.
Do not block the slots and openings in the HDT100.-
Position the HDT100 with at least 2 inches of space above and on all sides.-
-
Do not position the HDT100 near any external heat source that could raise the temperature around the unit.
- Do not position the HDT100 in an enclosed space that would restrict airflow around the unit.
Graphical symbols and supplemental warning marking locations on bottom of terminal.
WARNING
CAUTION
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
TO PREVENT ELECTRICAL SHOCK, DO NOT USE THIS (POLARIZED) PLUG WITH AN EXTENSION CORD,
RECEPTACLE, OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.
REPAIRS
1-866-668-2271 1-866-MOT-BCS1If you find the unit in need of repair, call Motorola Support at or .
MGBI
504781-001
07/03
Visit our website at:
www.motorola.com
Motorola HDT100
High Definition Tuner
Important Safety Instructions
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated
“dangerous voltage” within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point, within an equilateral triangle, is intended to alert the user to the presence
of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTSINSIDE.
CAUTION:
Antennalead
inwire
Ground
clamp
Antenna
dischargeunit
(NECSection 810-20)
Groundingconductors
(NECSection 810-21)
Grounding
clamps
Powerservice grounding
electrodesystem
(NECArticle 250, Part H)
Electricservice
equipment
NEC=NATIONALELECTRICAL CODE
EXAMPLE OF ANTENNA GROUNDING
VENTILATE
2 inch space
2
inch
2
inch
Quick Set-Up Guide
POWER
SIGNALLOSS
POWER
ENTER
MENU
EXIT
POWER
SIGNALLOSS
POWER
ENTER
MENU
EXIT