• Home
• Brands
• Maytag Manuals
• Maytag Cabrio,- WED5500X
• Maytag W10096988A Installation Instructions Manual

Maytag W10096988A Installation Instructions Manual

Download Installation instructions manual of Maytag Cabrio,- WED5500X Dryer for Free or View it Online on All-Guides.com. This version of Maytag Cabrio,- WED5500X Manual compatible with such list of devices, as: Cabrio,- WED5550X, Cabrio,- WED5600X, Cabrio,- WED5700X, WED5500XL, WED5600XW

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

8

Put power supply cord through the strain relief. Be sure that

the wire insulation on the power supply cord is inside the

strain relief. The strain relief should have a tight t with the

dryer cabinet and be in a horizontal position. Do not further

tighten strain relief screws at this point.

For 3-wire Power Supply Cord Connection, see page 8.

For 4 wire Power Supply Cord Connection, continue to

step 3 on this page.

Attach power supply cord

to strain relief

2.

A

B

C

D

Attach power supply cord

strain relief

Remove the screws from a 3/4" (19 mm) UL listed strain relief

(UL marking on strain relief). Put the tabs of the two clamp

sections (C) into the hole below the terminal block opening

(B) so that one tab is pointing up (A) and the other is pointing

down (D), and hold in place. Tighten strain relief screws just

enough to hold the two clamp sections (C) together.

1.

Power supply cord strain relief

4-wire Power Supply Cord Connection

Remove center, silver-colored terminal block screw (B).

Remove neutral ground wire (E) from external ground

conductor screw (A).

A

E

B

Prepare to connect neutral

ground wire and neutral wire.

3.

B

C

E

Connect neutral ground wire

and neutral wire

4.

Connect neutral ground wire (E) and neutral wire (white or

center) (C) of power supply cord under center, silver-colored

terminal block screw (B). Tighten screw.

IMPORTANT: A 4-wire connection is required for mobile

homes and where local codes do not permit the use of 3-wire

connections.

A

BF

E

G

D

C

A. 4-wire receptacle (NEMA type 14-30R)

B. 4-prong plug

C. Ground prong

D. Neutral prong

E. Spade terminals with upturned ends

F. 3/4" (19 mm) UL listed strain relief

G. Ring terminals

Power Supply Cord Connection