B&C Speakers 15 HPL 76W Specifications

Download Specifications of B&C Speakers 15 HPL 76W Speakers for Free or View it Online on All-Guides.com.

Brand: B&C Speakers

Category: Speakers

Type: Specifications for B&C Speakers 15 HPL 76W

Pages: 1 (0.52 Mb)

Download B&C Speakers 15 HPL 76W Specifications

B&C Speakers 15 HPL 76W Specifications - Page 1
1
Specifications
Nominal Diameter 380 mm (15 in)
Nominal Impedance 8
Minumum Impedance 7
Power Handling
(50-500 Hz)
Nominal
1
350 W
Continuous Program
2
700 W
Sensitivity (1W/1m)
3
97 dB
Frequency Range 40 – 2000 Hz
Voice Coil Diameter 76 mm (3 in)
Winding Material Copper
Former Material Fiber Glass
Winding Depth 18.5 mm (3/4 in)
Magnetic Gap Depth 10 mm (5/16 in)
Flux Density 1.15 T
Also available in 4 , data upon request
Thiele & Small Parameters
4
Fs 38 Hz
Re 6.1
Qes 0.44
Qms 5.5
Qts 0.41
Vas 157 dm
3
(5.5 ft
3
)
Sd 855 cm
2
(132.5 in
2
)
η
0
1.9%
X max ± 6 mm
X Var ± 4.5 mm
Mms 114 g
Bl 19.4 T·m
Le 2 mH
Mounting and Shipping Information
Overall Diameter 394 mm (15.5 in)
Bolt Circle Diameter 374 mm (14.7 in)
Baffle Cutout Diameter 355 mm (14 in)
Depth 171 mm (6.7 in)
Flange and Gasket Thickness 12.5 mm (0.5 in)
Net weight 3.5 kg (7.7 lb)
Shipping Weight 4.9 kg (10.8 lb)
Shipping Box 450x450x200 mm
(17.7x17.7x7.9 in)
1
2 hours test made with continuous pink noise signal (6 dB crest factor) within
the specified frequency range. Power calculated on rated minimum impedance.
Loudspeaker mounted in 110 liters (3.9 cu.ft
3
) bass-reflex box, tuned at 45 Hz.
2
Power on Continuous Program is defined as 3 dB greater than the Nominal rating.
3
Applied RMS Voltage is set to 2.83V for 8 ohms Nominal Impedance. Average
SPL from 200 to 2000 Hz.
4
Thiele-Small parameters are measured after a high level 20 Hz sine wave pre-
conditioning test.
15 HPL 76W | Woofer
High efficiency 15" woofer using a FEA computer designed high
energy Neodymium magnet assembly, extremely lightweight (only
3.5 kg). The aluminium basket is designed to effectively dissipate
heat during demanding use at full power, reducing power
compression. A special 3" copper voice coil using proprietary high
temperature adhesives guarantee a very good LF dynamic range
with a very low distortion figure. Recommended for bass-reflex
subwoofer enclosures where power is limited to 700W.
Speakers HPL Coaxials HF Compression drivers Horns