Lowrance X86 DS Installation And Operation Instructions Manual
Download Installation and operation instructions manual of Lowrance X86 DS GPS for Free or View it Online on All-Guides.com.
Brand: Lowrance
Category: GPS
Type: Installation and operation instructions manual
Model: Lowrance X86 DS , Lowrance X86 TX
Pages: 56
Download Lowrance X86 DS Installation and operation instructions manual
10
Position transducer mount on transom and mark mounting holes.
Side view (left) and shown from above (right).
5. Attaching transducer to transom. Remove the transducer from
the bracket and re-assemble it with the cable passing through the
bracket over the bolt as shown in the following figures.
Route cable over bolt and through bracket. Side view (left) and shown
from above (right).
Attach the transducer to the transom. Slide the transducer up or
down until it's aligned properly with the bottom of the hull as shown
in the preceding and following figures. Tighten the bracket's mount-
ing screws, sealing them with the sealant compound.
Adjust the transducer so that it's parallel to the ground and tighten
the nut until it touches the outer washer, then add 1/4 turn. Don't
over tighten the lock nut! If you do, the transducer won't "kick-up" if
it strikes an object in the water.
Align transducer centerline with hull bottom and attach to transom.
Transom
Transom
Flat-bottom hull Deep-"vee" hull
Bottom
of
hull