Lindy 40592 User Manual

Download Installation manual of Lindy 40592 Computer Accessories for Free or View it Online on All-Guides.com.

Brand: Lindy

Category: Computer Accessories

Type: Installation manual for Lindy 40592

Pages: 2

Download Lindy 40592 Installation manual

Lindy 40592 Installation manual - Page 1
1
Lindy 40592 Installation manual - Page 2
2
Notebook Security Bracket
Installation Guide English
LINDY No. 25007
LINDY No. 40592
www.lindy.com
Introduction
Thank you for purchasing the LINDY Heavy Duty Notebook
Security Bracket. This robust security bracket effectively secures
your notebook PC to a wooden desk or metal shelf.
Its high visibility design is ideal for use in schools, offices,
libraries, shops and other public display environments.
Packing List
2 x Adjustable arms
Desktop bracket with base plate
Locking section
Heavy duty lock & 2 keys
Key ring
1m foam
4 x Nuts
4 x Bolts
Spanner
Requirements for Installation
Tape measure
An electric drill with an 8mm bit suitable for wood or metal
use (depending on installation)
Installation
When installing the bracket, make sure the desk is at 90 degrees
to the wall and not on a sloped surface. For steel shelving or
desks use the small bolts to secure the base plate and use the
larger bolts to secure the arms together. For a wooden shelf or
desk, use the larger bolts to secure the base plate and the
smaller bolts to secure the arms together.
1. Place the base plate 100mm from the rear of the desk.
Make sure you can get the heavy duty lock into the desktop
bracket and that the notebook does not overhang the desk.
2. Once the base plate has been positioned, mark two holes
through the bolt apertures. Drill through the desk at the
marked positions using an 8mm drill bit.
Important! This bracket will accommodate
notebooks with the following width dimensions -
Minimum width: 30cm; Maximum width: 50cm
100mm
Drill through the desk
at these points
Shelf/Desk
Shelf/Desk
100mm
Base plate