Lexmark X644E User Manual
Download Technical reference manual of Lexmark T642dtn All in One Printer, Finishers for Free or View it Online on All-Guides.com. This version of Lexmark T642dtn Manual compatible with such list of devices, as: T642dtn, X646e MFP, X850e, X852e, X854e
Brand: Lexmark
Category: All in One Printer , Finishers , Printer , Printer Accessories
Type: Technical reference manual
Model: Lexmark T642dtn , Lexmark X644E , Lexmark X646e MFP , Lexmark X850e , Lexmark X852e , Lexmark X854e
Pages: 416
Memory
6-5
Part Number
Part Number as it is stored in the flash memory card header. If the flash memory is
formatted by the printer, the part number field is shown as (none). The part number
field for the disk is not printed.
Write Protected
Indicates the entire flash memory or disk is write-protected.
If the device is read/write protected, "Read/Write protected" is printed. If the
device is write-protected, "Write protected" is printed. If the device is not
protected, this line is blank.
For more information, see “File and Device Protection Commands” on page 3-93 and
“Protection” on page 6-7.
ID
Valid for PCL emulation macros, fonts, and symbol sets only. The ID must be used
when adding a description to a macro or a symbol set. If two files with the same file
type have duplicate IDs, the following occurs:
• If multiple macros or symbol sets have been created with duplicate download
IDs, only the last macro or symbol set is listed. It is the only one that can be
selected. On flash memory, the number listed for bytes unavailable
includes the unlisted macros and symbol sets. The bytes unavailable field
is not applicable for the disk device.
• PostScript emulation fonts, and files created by PostScript emulation file
operators, do not have IDs.