• Home
• Brands
• Lexmark Manuals
• Lexmark C510
• Lexmark C510 Quick Reference

Lexmark C510 Quick Reference

Download Quick reference of Lexmark C510 All in One Printer, Printer for Free or View it Online on All-Guides.com.

1

2

Quick Reference

Operator panel

Press Menu to:

• Enter the menus from the Ready state.

• Scroll through menus or values.

• Increase or decrease a numerical value.

• Display the Job Menu while the printer is busy.

Press Select to:

• Select the item on the second line of the display.

• Save the selection as a new default setting.

Press Return to return to the previous menu level.

Press Go to:

• Exit printer menus and return to the Ready state.

• Clear messages.

Press Stop to temporarily stop all print activity without losing data.

Printing this quick reference information

This quick reference information is also included, in a printable format, on the

publications CD that shipped with your printer.

Printing confidential jobs

If you want to print a job that is personal or confidential, and you do not want

anyone else to see it, the printer can hold your job in memory until you arrive at the

printer.

Note: This only works with custom printer drivers. These drivers are located on the

drivers CD that shipped with your printer.

To print a confidential job:

1 In your word processor, spreadsheet, browser, or other application, select

File Print.

2 Click Properties (or Options, Printer, or Setup, depending on the

application) to view the printer driver settings.

3 Click Help and refer to the topic “Confidential print” or “Print and hold.” Follow

the instructions.

Note: If you send a large file to a shared network printer, it remains in the printer

memory until you print it. This could prevent others from printing. Retrieve

your print jobs as soon as possible. To check the amount of memory in your

printer, see Printing a menu settings page.

4 Go to the printer and use the operator panel to access your confidential print

job:

a Press Menu until you see Job Menu, and then press Select.

b Press Menu

until you see Confidential Job, and then press Select.

c Press Menu until you see your user name, and then press Select.

d Enter your four-digit personal identification number (PIN) using the

numbered buttons on the operator panel. As you enter your PIN, asterisks

appear on the display.

e Press Menu until you see Print A Job, and then press Select. (Print

All Jobs sends all jobs with the same user name and PIN immediately to

the printer.)

f Press Menu

until you see the job you want to print, and then press Select.

g Press Go to send the job to the printer.

After the job prints, the job is deleted from printer memory and the printer returns to

the Ready state.

Clearing jams

This section shows how to clear jams based on the operator panel jam messages.

To clear any jam, grasp the jammed media with two hands and pull it gently away

from the printer to remove it.

Warning: Do not attempt to clear any jam using tools or instruments.

This may permanently damage the printer.

Jams behind the rear door

CAUTION: The inside of the printer near the fuser is hot.

To access jams behind the rear door, open the rear door and pull open both the

fuser pressure release levers. Remember to reposition the fuser pressure release

levers once you have removed the jam.

Operator panel display: 201 Paper Jam

Operator panel display: 202 Paper Jam

Jams in the optional duplex unit

Operator panel display: 230 Paper Jam

Operator panel display: 231 Paper Jam

Jams in trays

Operator panel display: 241 Paper Jam (standard tray)

Operator panel display: 242 Paper Jam (optional 530-sheet

tray)

Note: For a jam in an optional 530-sheet tray, you may not need to fully remove the

tray from its drawer.

1

Menu

2

Select

3

Return

4

Go

5

Stop

6

Rear door release lever

Fuser

pressure

release

levers

Rear door release lever

Fuser

pressure

release

levers