Kenmore Elite 79048902000 Installation Instruction

Download Installation instruction of Kenmore 79048902000 Microwave Oven for Free or View it Online on All-Guides.com.

Kenmore 79048902000 Installation instruction - Page 1
1
Kenmore 79048902000 Installation instruction - Page 2
2
Kenmore 79048902000 Installation instruction - Page 3
3
Kenmore 79048902000 Installation instruction - Page 4
4
Kenmore 79048902000 Installation instruction - Page 5
5
Kenmore 79048902000 Installation instruction - Page 6
6
Kenmore 79048902000 Installation instruction - Page 7
7
Kenmore 79048902000 Installation instruction - Page 8
8
Kenmore 79048902000 Installation instruction - Page 9
9
Kenmore 79048902000 Installation instruction - Page 10
10
Kenmore 79048902000 Installation instruction - Page 11
11
Kenmore 79048902000 Installation instruction - Page 12
12
UnitedStates INSTALLATIONAND SERVICEMUST BEPERFORMED BYA QUALIFIED INSTALLER. ¢onodo
IMPORTANT: SAVE FOR LOCAL ELECTRICAL INSPECTOR'S USE.
READ AND SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
FOR YOUR SAFETY: Do not stere or use gasoline or other
flammable vapors and liquids in the vicinity of this or any other appliance.
Your new wall oven has been designed |o fit a limited variety of cutout sizes to make the job of ins|alllng easier. The
first step of your installation should be to measure your current cutout dimensions and compare them to the cutout
dimensions chart below for your model. You may find little or no cabinet work being necessary.
De net remove spacers (if equipped) on the side walls and/or on the back of the built-ln oven.
These spacers center the oven in the space provided. The oven must be centered to prevent excess heat
buildup that may result in heat damage or fire.
* Suggested distance from floor is 111/d' (29.2 cm).
Minimum required distance is 4 1/d' (11.4cm).
1½" (3.8cm)
Min.
44 1/8"
(112.1cm)
DoorOpen
(see note 2) ..
11½"
(29.2
Spacer
2" (5 cm) Wide Wood Spacer if
Needed (see note 4)
NOTES:
1. Base must be capab{e of supporting 350 pounds (159 kg).
2. Allow at least 21" (53.3 cm) clearance in front of oven for
door depth when it is open.
3. Dimension G (cutout depth) is critical to the proper
installation of the built-in oven. If the oven decorative
trim does not butt against the cabinet, or if noise is heard
on convection models, verify dimension G to assure it is
according to the required dimension.
Electrical
Junction Box
Figure 1
**4. For a cutout height (H) between 441/2" (113cm) and
451/8" (114.6cm) add a 2" (5 cm) ,,vide wood shim of
appropriate height to each side of the opening under the
appliance side rails. Lifting the unit wilt ailow you to hide
the cutout openings showing above the unit The bottom
trim of the unit wilt hide the shims at the bottom.
**5. For a cutout height (H) between 451/8" (114.6 cm) and
467/8" (119.1cm) you can order a larger bottom trim
through your Service Center.
PRODUCT DIMENSIONS
MODEL I A J B I c I
30" (76.2 cm) Watl Oven 30 (76.2) 447/8 (114) 281/4 (71.8) 24Vt (62.2)
CUTOUT
30" (76.2 cm) Wait Oven 281/2 (72.4)
All dimensions are in inches (cm).
Printed in United States
29 (73.7) 23Vt (59.7) 44V4 (112.4) 44V2 (113) 30_/8 (76.5)Min
P/N 318201540 (1005) Rev.A
English - pages 1-6
Espa_ol -paginas 6-12