Juniper STRM 2008-2 - TECHNICAL NOTE CHANGING NETWORK SETTING 6-2008 Manual

Download Manual  of Juniper STRM 2008-2 - TECHNICAL NOTE CHANGING NETWORK SETTING 6-2008 Other for Free or View it Online on All-Guides.com.

Juniper STRM 2008-2 - TECHNICAL NOTE CHANGING NETWORK SETTING 6-2008 Manual  - Page 1
1
Juniper STRM 2008-2 - TECHNICAL NOTE CHANGING NETWORK SETTING 6-2008 Manual  - Page 2
2
Juniper STRM 2008-2 - TECHNICAL NOTE CHANGING NETWORK SETTING 6-2008 Manual  - Page 3
3
Juniper STRM 2008-2 - TECHNICAL NOTE CHANGING NETWORK SETTING 6-2008 Manual  - Page 4
4
Juniper STRM 2008-2 - TECHNICAL NOTE CHANGING NETWORK SETTING 6-2008 Manual  - Page 5
5
Juniper STRM 2008-2 - TECHNICAL NOTE CHANGING NETWORK SETTING 6-2008 Manual  - Page 6
6
Juniper STRM 2008-2 - TECHNICAL NOTE CHANGING NETWORK SETTING 6-2008 Manual  - Page 7
7
Juniper STRM 2008-2 - TECHNICAL NOTE CHANGING NETWORK SETTING 6-2008 Manual  - Page 8
8
Release 2008.2
Changing the Network Settings of a Non-Console in a Multi-System Deployment 7
Re-Adding the
Managed Host and
Re-Assigning the
Components
To re-add the managed host and re-assign component(s), you must:
Step 1 Log in to STRM and access the System View in the Deployment Editor, as defined
in Step 1, Removing the Non-Console Managed Host.
Re-add managed host to your deployment.
Step 2 From the menu, select Actions > Add a managed host.
The Add a new host wizard appears.
Step 3 Click Next.
The Enter the host’s IP window appears.
Step 4 Enter values for the parameters:
Enter the IP of the server or appliance to add — Specify the IP address of
the host you wish to add to your System View.
Enter the root password of the host — Specify the root password for the
host.
Confirm the root password of the host — Specify the password again, for
confirmation.
Step 5 Click Next.
Step 6 Click Finish.
Step 7 Re-assign all components to your non-Console managed host.
a In the STRM Deployment Editor, click the Flow View or Event View tab.
b Select the component you wish to re-assign to the managed host.
c From the menu, select Actions > Assign
Note: You can also use the right mouse button (right-click) to access the Actions
menu items.
The Assign Component wizard appears.
d From a Select a host drop-down list box, select the host you wish to re-assign
to this component. Click Next.
e Click Finish.
Step 8 From the Administrative Console menu, select Configurations > Deploy
Configuration Changes.
Changes are deployed.