Juniper JUNOS OS 10.4 - PROTECTED SYSTEM DOMAIN Configuration Manual
Download Configuration manual of Juniper JUNOS OS 10.4 - PROTECTED SYSTEM DOMAIN Other for Free or View it Online on All-Guides.com.
Brand: Juniper
Category: Other
Type: Configuration manual for Juniper JUNOS OS 10.4 - PROTECTED SYSTEM DOMAIN
Pages: 290
Download Juniper JUNOS OS 10.4 - PROTECTED SYSTEM DOMAIN Configuration manual
snmp
Syntax snmp-T system:mm[x] <-cax community-type> <-cx community-name> <-cxin (ip-address
| hostname)> <-cn contact-name> <-l location>
Release Information Command supported by Junos OS Release 9.1 and later.
Description (JCS1200 platform only) Display or configure SNMP settings on the JCS management
module.
Options -T system:mm[x]—Specify the JCS management module as the target of the command.
Replace x with a value of 1 or 2.
-cax community-type—(Optional) Specify an SNMPv3 view type for the community. View
types can be get, set, or trap. Replace x with a value of 1 through 3 to represent the
community number.
-cx community-name—(Optional) Specify a descriptive name for the community. Replace
x with a value of 1 through 3 to represent the community number.
-cxin (ip-address | hostname)—(Optional) Specify an IP address or hostname for the
community. Replace x with a value of 1 through 3 to represent the community number.
Replace n with a value of 1 through 3 to represent the host ranking (first, second, or third).
You can specify up to three hosts for each community.
-cn contact-name—(Optional) Specify a contact name for the SNMP community host
server.
-l location—(Optional) Specify a location for the SNMP community host server.
Required Privilege
Level
operator (display)
supervisor (display or configure)
Related
Documentation
Configuring SNMP Traps on page 43•
• alertentries on page 54
• monalerts on page 69
List of Sample Output snmp (Display) on page 75
snmp (Configure) on page 75
Output Fields Table 13 on page 74 lists the output fields for the snmp command. Output fields are listed
in the approximate order in which they appear.
Table 13: snmp Output Fields
Field DescriptionField Name
Status of the SNMP agent (enabled or disabled)a
Copyright © 2010, Juniper Networks, Inc.74
JUNOS 10.4 Protected System Domain Configuration Guide