Juniper JUNOS OS 10.4 - PROTECTED SYSTEM DOMAIN Configuration Manual
Download Configuration manual of Juniper JUNOS OS 10.4 - PROTECTED SYSTEM DOMAIN Other for Free or View it Online on All-Guides.com.
Brand: Juniper
Category: Other
Type: Configuration manual for Juniper JUNOS OS 10.4 - PROTECTED SYSTEM DOMAIN
Pages: 290
Download Juniper JUNOS OS 10.4 - PROTECTED SYSTEM DOMAIN Configuration manual
clock
Syntax clock <-d date> <-dst dst-mode> <-g offset> <-t time> -T system:mm[x]
Release Information Command supported by Junos OS Release 9.1 and later.
Description (JCS management module CLI) Display or configure the JCS management module clock
settings.
Options -d date—(Optional) Current calendar date in mm/dd/yyyy format.
-dst dst-mode—(Optional) Daylight saving mode for the clock. Choices include:
• off—Daylight saving time is off (Standard time)
• uc—United States and Canada
• others—Nonstandard daylight saving time (outside the United States and Canada)
-g offset—(Optional) UTC (GMT) offset, in hours. Replace offset with a value from -12 to
+12.
-t time—(Optional) Current time in 24–hour hh:mm:ss format.
-T system:mm[x]—Specify the JCS management module as the target of the command.
Replace x with a value of 1 or 2.
Required Privilege
Level
operator (display)
supervisor (display or configure)
Related
Documentation
Configuring the Time Zone on page 43•
List of Sample Output clock (Display) on page 59
clock (Configure) on page 59
Output Fields When you enter this command, you are provide with feedback on the status of your
request.
clock (Display) system> clock –T system:mm[1]
03/31/2008 16:27:11 GMT+5:00 dst uc
clock (Display)
clock (Configure) system> clock -d 04/01/2008 -t 22:12:04 dst uc –T system:mm[1]
OK
59Copyright © 2010, Juniper Networks, Inc.
Chapter 8: Summary of JCS Management Module Configuration Commands