Juniper JUNOS OS 10.4 - PROTECTED SYSTEM DOMAIN Configuration Manual
Download Configuration manual of Juniper JUNOS OS 10.4 - PROTECTED SYSTEM DOMAIN Other for Free or View it Online on All-Guides.com.
Brand: Juniper
Category: Other
Type: Configuration manual for Juniper JUNOS OS 10.4 - PROTECTED SYSTEM DOMAIN
Pages: 290
Download Juniper JUNOS OS 10.4 - PROTECTED SYSTEM DOMAIN Configuration manual
Tasks to configure SNMP traps and alerts on the JCS management module are:
•
Configuring the SNMP Community on page 44
•
Configuring Alert Entries for SNMP Traps on page 44
•
Configuring Monitored Alerts for SNMP Traps on page 45
Configuring the SNMP Community
The SNMP community defines the relationship between an SNMP server system and
client systems. To configure the SNMP community, set the community name and type.
Also set the IP address for the community.
To configure the SNMP community:
1. Log in to the JCS management module.
2. Use the env command to specify mm[1] as the configuration target. For example:
system> env -T mm[1]
3. Use the snmp command to configure the SNMP community. For example:
system:mm[1]> snmp -c3 trap
system:mm[1]> snmp -c3i1 192.168.171.100 -ca3 trap
In this example, the community 3 name is trap, the IP address of the trap destination
is 192.168.171.100, and the community 3 type is trap.
CAUTION: By default, SNMP is enabled on the JCS management module.
Do not disable SNMP. If you disable SNMP, your system might not function
correctly. Also, do not erase or change the SNMP default c1 community.
Configuring Alert Entries for SNMP Traps
To use SNMP notifications on the JCS management module, you must specify the alert
recipient. These recipients indicate where network registrar notifications are directed.
Alert recipients are numbered from 1 through 12.
To configure the alert recipient:
1. Log in to the JCS management module.
2. Use the env command to specify mm[1] as the configuration target. For example:
system> env -T mm[1]
3. Use the alertentries command to configure the alert recipient. For example:
system:mm[1]> alertentries -1 -n trap -status on -f none -t snmp
In this example, the alert recipient number is 1, the recipient is named trap, the alert
status is on, alert filtering is none (all alerts are received, not just critical alerts), and
the alert type is SNMP.
Copyright © 2010, Juniper Networks, Inc.44
JUNOS 10.4 Protected System Domain Configuration Guide