Juniper JUNOS OS 10.4 - PROTECTED SYSTEM DOMAIN Configuration Manual
Download Configuration manual of Juniper JUNOS OS 10.4 - PROTECTED SYSTEM DOMAIN Other for Free or View it Online on All-Guides.com.
Brand: Juniper
Category: Other
Type: Configuration manual for Juniper JUNOS OS 10.4 - PROTECTED SYSTEM DOMAIN
Pages: 290
Download Juniper JUNOS OS 10.4 - PROTECTED SYSTEM DOMAIN Configuration manual
protocol static;
route-filter 0.0.0.0/0 exact;
}
then reject;
}
term b {
from protocol static;
then {
next-hop self;
accept;
}
}
term c {
then reject;
}
}
}
Related
Documentation
Route Reflection Overview on page 8•
• Example: Configuring the JCS1200 Platform as a Route Reflector on page 157
• Junos Policy Framework Configuration Guide
Example: Consolidating a Layer 2 VPN Network
In this configuration example, a Layer 2 VPN network topology is reduced and simplified
by replacing two M320 routers at the provider edge (PE) of the network with a single
platform. The configuration for the consolidated Layer 2 VPN topology is described in
the following sections:
•
Requirements on page 177
•
Overview and Topology on page 177
•
Configuration on page 178
•
Verification on page 188
Requirements
This example requires the following hardware and software components:
•
Junos OS Release 9.1 or later
•
One JCS1200 platform with Routing Engines in slots 4, 5, and 6
•
One T640 router with FPCs in slots 4 and 5
Overview and Topology
In a typical Layer 2 VPN topology, a customer edge (CE) router is located on each
customer site, providing an Ethernet interface between the customer LAN and the provider
core network. Provider (P) routers are located in the core of the provider network, and
provider edge (PE) routers sit at the edge of the network.
177Copyright © 2010, Juniper Networks, Inc.
Chapter 14: Configuration Examples