Juniper JUNOS OS 10.4 - PROTECTED SYSTEM DOMAIN Configuration Manual
Download Configuration manual of Juniper JUNOS OS 10.4 - PROTECTED SYSTEM DOMAIN Other for Free or View it Online on All-Guides.com.
Brand: Juniper
Category: Other
Type: Configuration manual for Juniper JUNOS OS 10.4 - PROTECTED SYSTEM DOMAIN
Pages: 290
Download Juniper JUNOS OS 10.4 - PROTECTED SYSTEM DOMAIN Configuration manual
Overview and Topology
Figure 16: Example: Configuring Client-to-Client Reflection (OSPF)
R2
R1
R3
RR
g017297
10.12.1.3
10.12.1.2
10.12.1.4
JCS1200 Chassis
The example configuration shown in Figure 16 on page 167 contains one router reflector
(RR) and three client routers (R1, R2, and R3). The three routers (R1 through R3) and the
route reflector (RR) are configured as PSDs that include Routing Engines on the JCS
chassis.
The routers have the following loopback addresses:
•
RR—10.12.1.1
•
R1—10.12.1.2
•
R2—10.12.1.3
•
R3—10.12.1.4
With this configuration example, a route added to client router R1 is propagated to the
route reflector (RR) and to the other client routers (R2, R3). This example uses OSPF as
the IGP and enables BFD for the connections from the route reflector.
Configuration
First, configure protocols for the route reflector (RR), then configure protocols for the
routers (R1, R2, and R3).
•
PSD15 Configuration (Route Reflector) on page 168
•
PSD11 Configuration (Router 1) on page 169
•
PSD12 Configuration (Router 2) on page 172
•
PSD13 Configuration (Router 3) on page 174
167Copyright © 2010, Juniper Networks, Inc.
Chapter 14: Configuration Examples