Juniper JUNOS OS 10.4 - PROTECTED SYSTEM DOMAIN Configuration Manual
Download Configuration manual of Juniper JUNOS OS 10.4 - PROTECTED SYSTEM DOMAIN Other for Free or View it Online on All-Guides.com.
Brand: Juniper
Category: Other
Type: Configuration manual for Juniper JUNOS OS 10.4 - PROTECTED SYSTEM DOMAIN
Pages: 290
Download Juniper JUNOS OS 10.4 - PROTECTED SYSTEM DOMAIN Configuration manual
control-system-id 1;
control-slot-numbers 7;
control-plane-bandwidth-percent 50;
}
}
}
}
interfaces {
ge-6/0/0 {
vlan-tagging;
unit 0 {
interface-shared-with psd5;
vlan-id 16;
}
unit 1 {
interface-shared-with psd5;
vlan-id 17;
}
unit 2 {
interface-shared-with psd5;
vlan-id 18;
}
unit 3 {
interface-shared-with psd6;
vlan-id 100;
}
}
PSD5 Configuration
Step-by-Step
Procedure
To configure PSD5:
1. At the [edit interfaces] hierarchy level, include the ut-1/0/0 statement to configure
the physical tunnel interface.
2. At the [edit interfaces ut-1/0/0] hierarchy level, include the unit 0, unit 1, and unit 2
statements to configure the logical tunnel interfaces.
3. At the [edit interfaces ut-1/0/0 unit n] hierarchy level, include the peer-interface
ge-6/0/0.logical-unit-number statement to bind the tunnel and Gigabit Ethernet
interfaces together. Use the following logical-unit-number values:
• For unit 0, the value is 0.
• For unit 1, the value is 1.
• For unit 2, the value is 2.
4. At the [edit interfaces ge-6/0/0] hierarchy level, include the vlan-tagging statement
to match the configuration on the RSD, and the shared-interface statement to
identify the physical interface as the shared interface.
5. At the [edit interfaces ge-6/0/0] hierarchy level, include unit 0, unit 1, and unit 2
statements to configure logical interfaces.
6. At the [edit interfaces ge-6/0/0 unit n] hierarchy level, include the following
statements:
151Copyright © 2010, Juniper Networks, Inc.
Chapter 14: Configuration Examples