Juniper JUNOS OS 10.4 - PROTECTED SYSTEM DOMAIN Configuration Manual
Download Configuration manual of Juniper JUNOS OS 10.4 - PROTECTED SYSTEM DOMAIN Other for Free or View it Online on All-Guides.com.
Brand: Juniper
Category: Other
Type: Configuration manual for Juniper JUNOS OS 10.4 - PROTECTED SYSTEM DOMAIN
Pages: 290
Download Juniper JUNOS OS 10.4 - PROTECTED SYSTEM DOMAIN Configuration manual
c. Include the control-slot-numbers 5 control-slot-numbers 6 statement to assign
the Routing Engines in slots 5 and 6 in the JCS chassis to PSD1.
d. Include the control-plane-bandwidth-percent 50 statement to allocate 50 percent
of the bandwidth on the JCS switch modules and T Series Control Boards (T-CBs)
to PSD1.
5. At the [edit chassis system-domains] hierarchy level, include the
protected-system-domains psd2 statement to create PSD2.
6. At the [edit chassis system-domains protected-system-domains psd2] hierarchy
level:
a. Include the fpcs 4 fpcs 5 fpcs 6 fpcs 7 statement to assign the FPCs in slots 4, 5,
6, and 7 to PSD2.
b. Include the control-system-id 1 statement to identify the JCS1200 platform.
c. Include the control-slot-numbers 3 control-slot-numbers 4 statement to assign
the Routing Engines in slots 3 and 4 in the JCS chassis to PSD2.
d. Include the control-plane-bandwidth-percent 50 statement to allocate 50 percent
of the bandwidth on the JCS switch modules and T-CBs to PSD2.
7. At the [edit interfaces] hierarchy level, include the so-6/0/0 statement to configure
the physical SONET interface.
8. At the [edit interfaces so-6/0/0] hierarchy level, include the encapsulation
frame-relay statement to configure Frame Relay encapsulation on the physical
interface, and include the unit 0, unit 1, unit 2, and unit 3 statements to configure the
logical interfaces.
9. At the [edit interfaces so-6/0/0 unit n] hierarchy level, include the following
statements:
• interface-shared-with psdn—Assign the logical interface to a PSD:
• For unit 0, the value is 5 (PSD5).
• For unit 1, the value is 5 (PSD5).
• For unit 2, the value is 5 (PSD5).
• For unit 3, the value is 6 (PSD6).
• dlci dlci-identifier—Configure the data-link connection identifier (DLCI) for the
point-to-point Frame Relay connection:
• For unit 0, the value is 16.
• For unit 1, the value is 17.
• For unit 2, the value is 18.
• For unit 3, the value is 100.
139Copyright © 2010, Juniper Networks, Inc.
Chapter 14: Configuration Examples