Juniper JUNOS OS 10.4 - PROTECTED SYSTEM DOMAIN Configuration Manual
Download Configuration manual of Juniper JUNOS OS 10.4 - PROTECTED SYSTEM DOMAIN Other for Free or View it Online on All-Guides.com.
Brand: Juniper
Category: Other
Type: Configuration manual for Juniper JUNOS OS 10.4 - PROTECTED SYSTEM DOMAIN
Pages: 290
Download Juniper JUNOS OS 10.4 - PROTECTED SYSTEM DOMAIN Configuration manual
5. Configure a hostname and the IP addresses and prefix lengths for one or both of the
router management Ethernet interfaces (fxp0 and fxp1) on each Routing Engine.
If both interfaces are configured (for JCS switch module redundancy), we recommend
that the IP address for each interface be on a separate subnet. The fxp0 interface
connects to port 6 on the JCS switch module in bay 1, whereas the fxp1 interface
connects to port 6 on the JCS switch module in bay 2.
[edit]
root# edit groups
[edit groups]
root# set re0 system host-name router1
root# set re0 interfaces fxp0 unit 0 family inet address 10.10.10.1/24
root# set re1 system host-name router2
root# set re1 interfaces fxp0 unit 0 family inet address 10.10.10.2/24
root# set re0 system host-name router1
root# set re0 interfaces fxp1 unit 0 family inet address 10.20.20.1/24
root# set re1 system host-name router2
root# set re1 interfaces fxp1 unit 0 family inet address 10.20.20.2/24
6. Configure the routing platform’s domain name:
[edit]
root# set system domain-name domain-name
7. Set the loopback interface address for each Routing Engine.
[edit groups]
root# set re0 interfaces lo0 unit 0 family inet address 2.2.2.1/32
root# set re1 interfaces lo0 unit 0 family inet address 2.2.2.2/32
8. Issue the apply-groups statement to reproduce the configuration group information
to the main part of the configuration.
[edit groups]
root# top
[edit]
root# set apply-groups [re0 re1]
9. Configure Routing Engine redundancy:
[edit]
root# set chassis redundancy routing-engine 0 master
root# set chassis redundancy routing-engine 1 backup
root# set chassis redundancy routing-engine graceful-switchover
10. Save the configuration change on both Routing Engines:
[edit]
root# commit synchronize
11. Configure the IP address of a backup or default routing platform.
[edit]
root# set system backup-router address
Choose a router that is directly connected to the local routing platform by way of the
management interface.
Copyright © 2010, Juniper Networks, Inc.90
JUNOS 10.4 Protected System Domain Configuration Guide