Jet JBC Series Owner's Manual
Download Owner's manual of Jet JBC Series Accessory for Free or View it Online on All-Guides.com.
OWNER’S MANUAL
JBC Series Beam Clamps
WARNING
• Read and understand all warnings and operating instructions before attempting to use the beam
clamp.
• Beam clamps are designed and intended for use on “I” and “H” beams having an installed rated
value of the beam clamp.
• NEVER install a beam clamp on a beam that has not been rated or tested for attachment of lifting
devices.
• Beam clamp must be fully tightened and fully engage beam before use.
• Beam clamps are designed for vertical lifts only. DO NOT use for side or angle pulls or lifts.
• Always replace worn, damaged or missing labels.
Failure to comply with these warnings may result in personal injury and/or property damage.
JET P.O. BOX 1349 Phone: 253-351-6000
WMH Tool Group Auburn, WA 98071-1349 Fax: 1-800-274-6840
www.jettools.com e-mail jet@wmhtoolgroup.com M-252710 6/02