Jeep 2WD User Manual

Download Catalog of Jeep 2WD Lawn Mower for Free or View it Online on All-Guides.com.

Brand: Jeep

Category: Lawn Mower

Type: Catalog

Model: Jeep 2WD , Jeep 4WD

Pages: 6

Download Jeep 2WD Catalog

Jeep 2WD Catalog - Page 1
1
Jeep 2WD Catalog - Page 2
2
Jeep 2WD Catalog - Page 3
3
Jeep 2WD Catalog - Page 4
4
Jeep 2WD Catalog - Page 5
5
Jeep 2WD Catalog - Page 6
6
JEEP
Kit Breakdown
(included in complete kit)
Front / Rear Recommended Complete Kit Front / Rear Front Rear
Year Application Ride Height
(2) Tire Size ES Series or MX6 Kit Coils Coils
97-06 TJ Wrangler / Unlimited 1.5" / 1.5" 31"x10.50" K3054 (3,6) 55415 Spacer Spacer
K3054MX
(3,6) 55415 Spacer Spacer
97-06 TJ Wrangler / Unlimited 2.0" / 2.0" 32"x11.50" K3055 (3,6) ——— 55297 55298
K3055MX
(3,6) ——— 55297 55298
03-06 TJ Wrangler / Rubicon 4.0" / 4.0" 33"x12.50" K3076B
(3,5) 55695B 55497 55498
w/hard top K3077BMX
(3,5) 55695B 55497 55498
w/soft top K3078BMX
(3,5) 55695B 55497 55498
04-06 Wrangler Unlimited/ 4.0" / 4.0" 33"x12.50" K3084B
(3,5) 55695B 55497 55404
Rubicon K3084BMX (3,5) 55695B 55497 55404
97-02 TJ Wrangler 4.0" / 4.0" 33"x12.50" K3056B
(3,5) 55495B 55497 55498
K3056BMX
(3,5) 55495B 55497 55498
97-02 TJ Wrangler 4.0" / 4.0" 33"x12.50" K3057B
(3,5) 55499B (1) 55497 55498
K3057BMX
(3,5) 55499B (1) 55497 55498
40
JEEP TJ WRANGLER STAGE I 4WD
JEEP TJ WRANGLER STAGE II 4WD
Complete Kit
Important
Ordering Notes
4WD/2WD
• Rear pinion adjustment cams P/N 20-65225 can be used for tuning pinion angle for minor driveline vibration correction.
• Removal of front skid plate on vehicles with automatic transmissions is required for driveshaft clearance when transfer case lowering hardware is used.
• Coil spacer P/N 55496 can be used to increase front ride height by 1" when additional accessories ( winch, winch bumper, trail equipment) are added.
• P/N 90-6048B contains 16 bushings and 8 bushing sleeves.
1. Box kit P/N 55499B, adds Pro Comp's exclusive cross link braced front track bar drop and a drop pitman arm. 97-02 models only.
2. All ride height increases are approximate and will vary due to vehicle specifications ( engine size, factory suspension options , trail equipment, etc).
3. Driveline modifications may be required for height increases over 2" due to increased driveline angles.
4. Add G to the end of crawler bumper P/N for gunmetal gray finish.
5. Front and rear lower arms, transfer case lowering hardware, and extended sway bar links included in all 4" box kits.
6. Transfer case lowering hardware kit P/N 55589 (97-02 only) can be used for minor driveline vibration correction.
WCPG_2006_PROCOMP 3/24/06 7:05 PM Page 40