Intermec Trakker Antares 2480 User Manual

Download Operation & user’s manual of Intermec Trakker Antares 2480 PDA for Free or View it Online on All-Guides.com.

Intermec Trakker Antares 2480 Operation & user’s manual - Page 1
1
Intermec Trakker Antares 2480 Operation & user’s manual - Page 2
2
Intermec Trakker Antares 2480 Operation & user’s manual - Page 3
3
Intermec Trakker Antares 2480 Operation & user’s manual - Page 4
4
Intermec Trakker Antares 2480 Operation & user’s manual - Page 5
5
Intermec Trakker Antares 2480 Operation & user’s manual - Page 6
6
Intermec Trakker Antares 2480 Operation & user’s manual - Page 7
7
Intermec Trakker Antares 2480 Operation & user’s manual - Page 8
8
Intermec Trakker Antares 2480 Operation & user’s manual - Page 9
9
Intermec Trakker Antares 2480 Operation & user’s manual - Page 10
10
Intermec Trakker Antares 2480 Operation & user’s manual - Page 11
11
Intermec Trakker Antares 2480 Operation & user’s manual - Page 12
12
Part No. 067564-002
1
Configuring Terminal Emulation on the T2480 and T2485
This instruction sheet contains additional information for the TRAKKER Antares
Terminal Emulation User’s Guide (Part No. 066694-002). If you have a TRAKKER
Antares
2480 or 2485 terminal (T2480 or T2485) with 3270, 5250, or VT/ANSI
terminal emulation (TE), please use this instruction sheet as a supplement to your
user’s guide.
Note: The TE security feature is not supported on T2480 and T2485 terminals.
Important: Do NOT use the TE Configuration menu to configure terminal emulation.
The TE Configuration menu screens do not fit in the screen window area and you
cannot read all the options. If you do get into the menu, try pressing to exit.
To configure TE parameters on the T2480 and T2485, you need to
1. Upload the TE configuration file from the T2480 or T2485 to your PC, DCS 300,
or Model 200 Controller.
Note: The terminal will communicate with either the DCS 300 or the Model 200
Controller. The DCS 300 is a new data collection server that replaces the Model
200 Controller.
2. Use a text editor to modify the TE configuration file.
3. Download the TE configuration file from your PC, DCS 300, or Model 200
Controller to the T2480 or T2485.
The next sections of this instruction sheet explain each step and explain what TE
parameters can be set. The following table lists the TE applications and their TE
configuration file names. To see an example of a TE configuration file, see Appendix B
of the TRAKKER Antares Terminal Emulation User’s Guide.
TE Application Configuration File Name
3270 TE3270.CFG
5250 TE5250.CFG
VT/ANSI TEANT.CFG