HP iPAQ 500 Supplementary Manual

Download Application note of HP iPAQ 500 Series Cell Phone for Free or View it Online on All-Guides.com. This version of HP iPAQ 500 Series Manual compatible with such list of devices, as: iPAQ 500 Series, iPAQ 510 - Voice Messenger, iPAQ 512 - Voice Messenger, iPAQ 514 - Voice Messenger

HP iPAQ 500 Series Application note - Page 1
1
HP iPAQ 500 Series Application note - Page 2
2
HP iPAQ 500 Series Application note - Page 3
3
HP iPAQ 500 Series Application note - Page 4
4
HP iPAQ 500 Series Application note - Page 5
5
HP iPAQ 500 Series Application note - Page 6
6
HP iPAQ 500 Series Application note - Page 7
7
HP iPAQ 500 Series Application note - Page 8
8
HP iPAQ 500 Series Application note - Page 9
9
HP iPAQ 500 Series Application note - Page 10
10
HP iPAQ 500 Series Application note - Page 11
11
HP iPAQ 500 Series Application note - Page 12
12
HP iPAQ 500 Series Application note - Page 13
13
HP iPAQ 500 Series Application note - Page 14
14
HP iPAQ 500 Series Application note - Page 15
15
HP iPAQ 500 Series Application note - Page 16
16
HP iPAQ 500 Series Application note - Page 17
17
HP iPAQ 500 Series Application note - Page 18
18
HP iPAQ 500 Series Application note - Page 19
19
and that VoIP will be used for the next outgoing call. The Phone Dialer can be used to
make and receive VoIP calls. The Internet Calling status can be toggled between
Available’ and ‘Selected’ by pressing the Action [Enter] button on the Internet Calling
plug-in on the home screen.
If the status of the plug-in is ‘No Service’, it indicates that the registration was
unsuccessful. This could be due to lack of Wi-Fi access, the IP-PBX being unavailable or
some other failure.
9.4 VOIP DIAL PLAN
The dial plan for VoIP consists of dialing rules. These dialing rules are constructed using
regular expressions. Please refer to the Windows Mobile 6 documentation for information
on creating dialing rules. The dial plan is an XML file based on the OMA provisioning
standard. The Voice Messenger comes with a default dial plan which may not necessarily
work for a specific set-up. The dial plan will have to be modified and to do this, a base
XML template will be provided. This should be used to add new dialing rules specific to
the infrastructure being targeted. Once the XML template is modified to add new rules, it
should be applied to the phone/s to provision the phone/s with the updated VoIP dial
plan. This can be done using any of the provisioning methods supported by Windows
Mobile 6 –
1. OTA using OMA Client provisioning [WAP push].
2. OTA using OMA Device Management provisioning. [OMA DM server is
required].
3. Using a CAB Provisioning Format [.cpf] file which can be delivered over HTTP,
or by using a SD/MMC card or copied over to the phone directly using
ActiveSync.
4. Using Remote API [RAPI] in ActiveSync to push the provisioning XML file to
the phone.
5. Application Developers can use the DMProcessConfigXML API to provision.
Please refer to the Windows Mobile 6 documentation for additional details on the
provisioning methods listed above.
HP iPAQ Setup Assistant cannot be used to make any significant changes to the dial plan.
It can only be used to add a prefix digit to 11-digit, 10-digit and 7-digit outgoing phone
numbers. It is HIGHLY RECOMMENDED that any modifications/additions/deletions to
the dial plan should be done using any of the provisioning methods mentioned above. HP
iPAQ Setup Assistant MUST only be used to configure/modify SIP settings.
9.4.1 IMPORTANT NOTE ABOUT EMERGENCY CALLING
Emergency Calling over IP is not supported by the Voice Messenger. All emergency calls
must be placed over cellular. To ensure this, a dialing rule specifically for emergency
calling MUST be added to the VoIP dial plan. This rule will indicate what the emergency