Managing wireless networks
Viewing or editing a network
To view or edit an existing or available wireless network, perform the following steps:
1. On the Today screen, tap Start > iPAQ Wireless > iPAQ WLAN, or tap the iPAQ WLAN icon in the
lower right corner of the Today screen.
2. Tap Setup.
3. Select an existing profile from the Profile drop-down list.
4. Tap the Edit button.
5. Make the desired changes to the profile.
6. Tap OK to save the changes.
Deleting a network
To delete a wireless network, perform the following steps to delete the profile:
1. On the Today screen, tap Start > iPAQ Wireless > iPAQ WLAN, or tap the iPAQ WLAN icon in the
lower right corner of the Today screen.
2. Tap Setup.
3. Select an existing profile from the Profile drop-down list.
4. Tap the Delete button.
5. Tap Yes to confirm.
Monitoring signal strength and status
Perform the steps in either of the following scenarios to view the signal strength between the HP iPAQ
Pocket PC h5400 series with Microsoft Pocket PC 2002 handheld device and the access point WLAN
connection:
Note: The signal strength icon will only display when a connection is present.
1. On the Today screen, tap Start > iPAQ Wireless > iPAQ WLAN.
– or –
1. On the Today screen, tap the iPAQ WLAN icon at the bottom right-hand corner of the screen.
2. Tap Setup in the pop-up box that appears.
The signal strength appears in a triangular icon at the bottom right-hand corner of the screen. The
signal strength displays as a percentage beneath the icon and as a colored area within the icon. A
green color indicates the stronger connection signal.
Figure 5. The WLAN signal strength indicator for the HP iPAQ Pocket PC h5400 series with Microsoft Pocket PC 2002
30