7. Tap the Connectivity icon > Settings > Advanced tab > Select Networks box to open the Network
Management window.
8. Under Programs that automatically connect to the Internet should connect using, tap the down
arrow and select your work network.
9. Tap OK repeatedly to return to the Today screen.
10. Perform a soft rest of the HP iPAQ. When the wireless card associates with an access point, the
Logon Window pop-up box appears. Select the appropriate keyboard and enter the user name
and the password to be used. Leave the domain field blank, and tap the Save Password box.
Searching for networks to access
Networks that you have already configured are preferred networks and can be found on the iPAQ
Wireless screen by tapping the iPAQ Wireless icon > Wi-Fi Settings. You can choose whether to
connect only to preferred networks or to have your HP iPAQ search for and connect to any available
network (preferred or not).
1. Be sure Wi-Fi is powered on.
2. From the iPAQ Wireless screen, tap the Wi-Fi Settings button > Wireless tab.
3. In the Networks to access box, tap the type of network you want to connect to (All Available,
Only access points, or Only computer-to-computer).
4. To connect only to networks that have already been configured, clear the Automatically connect
to non-preferred networks checkbox.
Note: If the Automatically connect to non-preferred networks checkbox is checked, then the HP iPAQ will detect any new
networks and provide the opportunity to configure them.
Managing wireless networks
In managing your wireless networks, sometimes it is necessary to change network settings. In the next
two sections, learn how to view, edit, and delete available wireless network settings.
Viewing or editing a network
To view or edit an existing or available wireless network:
1. Be sure Wi-Fi is powered on.
2. From the iPAQ Wireless screen, tap Wi-Fi Settings > Wireless tab.
3. In the wireless networks list box, tap the desired network name.
4. Edit the existing settings as necessary, and then tap OK to save the changes.
Deleting a network
To delete an existing or available wireless network:
1. Be sure Wi-Fi is powered on.
2. From the iPAQ Wireless screen, tap Wi-Fi Settings > Wireless tab.
3. In the wireless networks list box, tap and hold the network you want to delete.
4. Tap Remove Settings.
24
