• Home
• Brands
• Hotpoint Manuals
• Hotpoint BD52 Mk2
• Hotpoint BD62 Mk2 Instructions For Installation And Use Manual

Hotpoint BD62 Mk2 Instructions For Installation And Use Manual

Download Instructions for installation and use manual of Hotpoint BD52 Mk2 Oven for Free or View it Online on All-Guides.com. This version of Hotpoint BD52 Mk2 Manual compatible with such list of devices, as: BD52 Mk2, BD62 Mk2, DE47X1, DQ47 Mk2

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

27

28

29

30

31

32

33

34

35

36

37

38

39

40

41

42

43

44

45

46

47

48

39

Care and Cleaning (BD62 & BD52)

Take particular care not to damage the inner surface of the door inner glass

that is coated with a heat reflective layer. Do not use scouring pads, or

abrasive powder, which will scratch the glass. Ensure that the glass panel is

not subjected to any sharp mechanical blows.

Stubborn stains can be removed by using a fine steel wool pad.

For slight soiling

the inner glass panel may be cleaned, while still warm, without removing it from

the door. After cleaning, rinse and dry with a soft cloth.

CLEANING THE DOORS

SIDE OPENING DOORS

Cleaning the door glass is the same as the drop down doors, except take care

to support the weight of the inner glass when removing and refitting.

DROP DOWN DOORS

Remove the door inner glass as follows.

1. Open the door fully and unscrew the two screws securing the glass

panel so that the securing brackets can be turned. There is no need to

remove the screws completely.

2. Turn the brackets so that the glass can be removed and cleaned at the

sink (Fig. 1.)

3. The inside of the outer door glass can now be cleaned while still fitted

to the cooker.

NEVER OPERATE THE COOKER WITHOUT THE INNER DOOR GLASS

IN POSITION.

Refit the door inner glass as follows.

1. NOTE: The inner door glass has a special reflective coating on one side.

Replace the door inner glass so that the statement: “IMPORTANT THIS

FACE TOWARDS THE OVEN” can be read from the inner side of the

door.

2. Turn the two securing brackets back to

their original position to retain the

glass and tighten the screws. (Fig. 2.)

Fig. 1.

Fig. 2.