Hewlett-Packard ProLiant DL980 - G7 Server Setup Poster

Download Setup poster of HP ProLiant DL170e - G6 Server DVD Drive, Server for Free or View it Online on All-Guides.com.

HP ProLiant DL170e - G6 Server Setup poster - Page 1
1
HP ProLiant DL170e - G6 Server Setup poster - Page 2
2
HP ProLiant Server
Setup Poster
Third edition (June 2010)
Part number 407335-003
Translated versions
To view, select a language:
English http://www.hp.com/support/ProLiant_Poster_en
Francois http://www.hp.com/support/ProLiant_Poster_fr
Italiano http://www.hp.com/support/ProLiant_Poster_it
Español http://www.hp.com/support/ProLiant_Poster_sp
Deutsch http://www.hp.com/support/ProLiant_Poster_gr
Nederlands http://www.hp.com/support/ProLiant_Poster_nl
Português Brasileiro http://www.hp.com/support/ProLiant_Poster_bp
http://www.hp.com/support/ProLiant_Poster_jp
http://www.hp.com/support/ProLiant_Poster_sc
Site requirements
Select an installation site that meets the detailed installation site
requirements described in the server user guide on the Documentation CD.
Rack planning resources
The rack resource kit ships with all HP branded or Compaq branded
9000, 10000, and H9 series racks. For more information on the content of
each resource, refer to the rack resource kit documentation.
If you intend to deploy and congure multiple servers in a single rack, refer
to the white paper on high-density deployment at the HP website
http://www.hp.com/products/servers/platforms.
Contents of the server shipping carton
Unpack the server shipping carton, and locate the materials and
documentation necessary for installing the server.
1 Installing options
Install any hardware options before initializing the server. For options
installation information, see the documentation that ships with the
option. For server-specic information, see the server user guide on the
Documentation CD.
2 Installing the server
WARNING: The server is very heavy. To reduce the risk of
personal injury or damage to the equipment:
Reduce the weight of the server by removing the hard drives and
power supplies before installing the server into the rack.
Get help to lift and stabilize the server during installation. When
the server weighs more than 22.5 kg (50 lb), two people might
be required to install the server into the rack.
CAUTION: Always plan the rack installation so that the heaviest
item is on the bottom of the rack. Install the heaviest item rst, and
continue to populate the rack from the bottom to the top.
Install the server into the rack. For more information, see the Quick Deploy
Rail System Installation Instructions that ship with the rack hardware kit.
3 Connecting peripheral devices to
the server
IMPORTANT: When using cable management arm components,
be sure to leave enough slack in each of the cables to prevent
damage to the cables when the server is extended from the rack.
Connect the peripheral devices to the server. The ports are labeled on the
rear of the server. For more information on ports and connectors, see the
server user guide on the Documentation CD.
© Copyright 2009, 2010 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice. The only warranties
for HP products and services are set forth in the express warranty statements accompanying
such products and services. Nothing herein should be construed as constituting an additional
warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.
Important Safety Information
Les "Viktig sikkerhetsinformasjon" på dokumentasjons-CDen før du installerer dette produktet.
Læs dokumentet Vigtige sikkerhedsoplysninger på dokumentations-cd'en, før produktet installeres.
Prima dell'installazione, leggere sul CD le Informazioni importanti sulla sicurezza.
Tärkeisiin turvatietoihin" Documentation CD -levyllä ennen tuotteen asentamista.
Läs dokumentet Viktig säkerhetsinformation på dokumentations-cd:n innan du installerar denna produkt.