Hewlett-Packard Integrity cx2600 Maintenance Manual
Download Maintenance manual of HP Integrity cx2600 Server for Free or View it Online on All-Guides.com.
2. Locate the system battery on the system board (Figure 7-45).
CAUTION: Do not overstress the battery retaining clip. This clip is easily broken. Lift the
battery just high enough to clear the battery holder. Failure to heed this warning can result
in damage to the clip.
3. Lift the retaining clip and set the new battery in place. Reposition the retaining clip to secure
the battery.
NOTE: The positive terminal of the battery is designated by the + sign. The battery is
installed with the + sign facing up.
Removing and Replacing the System Board
The system board is removed through the top of the chassis.
WARNING! Ensure that the system is powered off and all power sources are disconnected
from the server prior to removing or installing server hardware.
Voltages are present at various locations within the server whenever a DC power source is
connected. This voltage is present even when the main power switch is turned off.
Failure to observe this warning can result in personal injury or damage to equipment.
CAUTION: Observe all ESD safety precautions while performing this procedure. Failure to
follow ESD safety precautions can result in damage to the server.
Figure 7-46 System Board
Removing the System Board
To remove a system board, follow these steps:
Removing and Replacing the System Board 163