Hewlett-Packard Integrity cx2600 Maintenance Manual
Download Maintenance manual of HP Integrity cx2600 Server for Free or View it Online on All-Guides.com.
Figure 7-13 Inserting a DIMM into a DIMM Socket
dimm_sokt
NOTE: DIMM connectors are keyed so that you can only install them in the correct
orientation.
9. Firmly and evenly push down on each side of the DIMM until it seats in the socket. The
socket retainer clips snap up and return to the upright position when the DIMM is fully
inserted.
10. Make sure the DIMM is locked in the socket.
11. Repeat steps Step 6 through Step 10 for each DIMM to be installed.
12. Set the memory airflow guide in position and reinstall the top cover. See “Installing the
Memory Airflow Guide” (page 128) and “Removing and Replacing the Top Cover” (page 123).
Removing and Replacing the PCI Card Cage
The server has four 64-bit, 133 MHz PCI-X accessory card sockets located in a removable card
cage. You must remove the PCI card cage before installing or removing accessory cards. The
following sections explain how to access the PCI card cage, and remove and install the accessory
cards.
Removing the PCI Card Cage Assembly
To remove the PCI card cage assembly, follow these steps:
1. If rack-mounted, extend the server out from the rack until it stops. See “Installing Components
When the Server Is in a Rack” (page 114).
2. Power off the server. Disconnect all external cables.
Removing and Replacing the PCI Card Cage 131